• Place a container under the brewing head. Run through about 1/3 of the liquid
immediately, setting the selector to the position (9).
• Stop the appliance by pressing button (N) (4) and leaving the position (9) engaged
and wait for 10 – 15 minutes to allow the descaler to take effect.
• Next, start the machine again by pressing button (N) (4) and allow the rest of the liquid
to run through.
• Then rinse with two water tanks of fresh water, clean the brewing head and replace the
grid on the head of the appliance (Consult the “Cleaning the Machine” section).
Problems Probable causes Corrective actions
Espresso not hot enough. Cups, filter and filter holder are Preheat the accessories (cups,
cold. filter, filter holder) .See paragraph
"Preparing an espresso".
20 KRUPS
CafféEspresso
4
Espresso
9
CafféEspresso
4
Espresso
9
Troubleshooting
CafféEspresso
4
XP 2000 US.qxd 28/06/06 10:56 Page 20