Worth Data 5000 owner manual Troubleshooting, Display and Error Messages

Chapter 14: Troubleshooting

Display and Error Messages

The following is an alphabetical list of all messages the TriCoder can display. Some describe an error state; others are simply instruction.

Message

APPEND DATA FILE KEY [YES/NO]?

Meaning Operator Action

Using Multiple Data files selected and Press YES or NO. already have data in a file it will ask this.

Do you want to append data to it?

ARE YOU SURE?	You have asked to delete a file or				YES to confim
KEY [YES/NO]?	change a setup option. Are you sure?				NO to cancel
	Just checking.
BATTERY TOO LOW TO OPERATE	The battery is too low to continue. The				Charge		the	battery		and
HIT ANY KEY TO POWER DOWN	TriCoder automatically shuts down.				resume operation.
BEGIN OF FILE	You are at the beginning of a data file				PRESS ANY KEY to view the
HIT ANY KEY_	or program file.				beginning of the file.
CHARGING BATTERY	The battery is being recharged - The				Charge		the	battery		and
PLEASE WAIT…					resume operation.
Choose USB Interface	USB plugged in; Computer Interface				Use 2 if Mac. Use 2 if you
1- USB Full Speed	not set to any USB option.				want to upload data through
2-PC USB Keyboard					PC Keyboard. Use 1 for PC
					Full-speed Uploads & Host
					Controlled USB Operations.
Data File Exist	Firmware	download	had	been YES		generates			“ARE YOU
Delete Data File?	requested, and a data file exists.				SURE?” Deletion occurs with
KEY [YES/NO]?					YES/YES. NO			exits to Main
					Menu.
DATA FILE EXISTS	You are trying to edit a program or				Upload data file and delete it if
PRESS ANY KEY_	enter Data Collection with data already				you need to edit program other
	in memory.				than prefix and suffix, or if you
					want to start new data file.
DATA NOT FOUND	You either hit BEGIN to review data and				HIT ANY KEY to resume
HIT ANY KEY_	no data was found or you attempted to
	upload and no data was found.
Data Review Request	You pressed the UP ARROW key.				Press the BEGIN key to enter
Press <BEGIN> key to					Data Review Mode or press
Start or <F1> for					F1 to resume data collection.
Data Collection
DATA TOO LONG	Too many characters were entered.				Enter	fewer		characters		or
PRESS ANY KEY_					increase		your		Maximum
					Character Length.
DATA TOO SHORT	Too few characters were entered.				Enter	more		characters		or
HIT ANY KEY_					decrease		your		Minimum
					Character Length.
DATA TYPE ERROR	Alphabetic	character entered		when	Re-enter data or change Data
HIT ANY KEY_	numeric is expected or vice versa.				Type in program.
DELETE PROGRAM?	Upon entering Programming Mode, you				Press YES to delete program.
KEY [YES/NO]?_	selected a program and answered NO to				Press NO to go back to menu.
	EDIT PGM? Do you want to delete?
Downloading Firmware	Firmware Download has started.				Wait 1.5 minutes for serial.
Please Wait					Wait 0.5 minutes for USB.
DUPLICATE ACCESS	In a table where you have specified NO				HIT	ANY	KEY.		Enter a
HIT ANY KEY_	DUPLICATE ACCESS		you	have	different piece of data.
	accessed a record twice.
END OF FILE	You are at the end of a data file or a				Press any key to see last
HIT ANY KEY_	program file.				record.
END OF TRANSMIT	A data file has been successfully				Press YES to delete the file
DELETE FILE [Y/N]?_	uploaded.	Do you want to delete the			Press NO to keep the file.
	file?
ENTER PASSWORD?_	You are trying to enter Programming				Key in the password - WDTRI
	Mode or the SYSTEM SETUP and
	need to enter the password. The
	password	prevents programming and
	setup accidents.
ENTRY TYPE ERROR	In Programming Mode, you have				HIT ANY KEY and re-enter
HIT ANY KEY_	entered a character other than				character.
	DQTYSX at the ENTRY TYPE prompt.

83