2 of 5 Code

 

 

2 OF 5 CODE OPTIONS

 

INTERLEAVED 2 OF 5 -------

ON/OFF

1

CHECK DIGIT -------------------

ON/OFF

2

TRANSMIT CHECK DIGIT

ON/OFF

3

STANDARD 2 OF 5 ------------

ON/OFF

4

2 OF 5 CHECK DIGIT LENGTH -- 06

5

2 DIGITS FROM 00-98

 

 

DEFAULT IS 06

 

 

TEST MODE ONLY 00

 

 

DONE/EXIT --------------------------------

0

CHANGE SETTING #: _

 

 

oSetting 2 requires that the last digit in your bar code conform to the specifications for the 2 of 5 check digit calculation. See Appendix H: 2 of 5 Code for more information.

oTransmission of the check digit (3) requires the use of setting 2 and will transmit the check digit along with the bar code data

to the computer.

o2 of 5 is so susceptible to misreads that the TriCoder adds an additional safeguard - it can be configured to look for fixed-

length data only.

oThe default setting of 06 causes the TriCoder to read only 2 of 5 codes that are 6 digits in length. To set the TriCoder to read a different length, enter any two-digit number. 2 of 5 code must always be an even number of digits so the length setting

must always be an even number.

oReading variable length I 2of5 or 2 of 5 codes is to be avoided if at all possible. The 00 setting is supplied for the purposes of reading codes of unknown length, counting the digits and setting the length to the proper number.

Codabar

 

 

CODABAR OPTIONS

 

CODABAR ------------------------

ON/OFF

1

CODABAR CLSI ----------------

ON/OFF

2

START STOP CHAR -----------

ON/OFF

3

DONE/EXIT --------------------------------

0

CHANGE SETTING #: _

 

 

oCLSI is a form of Codabar often used by libraries.

oSetting 3 will transmit the Codabar start and stop characters with the bar code data to your computer. If you are varying the start and stop characters to differentiate between different labels, transmitting the start and stop can be helpful. See Appendix J: Codabar for more information.

MSI/Plessey

MSI/PLESSEY

 

 

MSI/PLESSEY --------------------

ON/OFF

1

TRANSMIT CHECK DIGITS

0/1/2

2

DONE/EXIT --------------------------------

0

CHANGE SETTING #: _

oThe MSI/Plessy options are selected by pressing the 1 key to select the desired mode of operation.

oIf you have enabled the Mod 10 or Mod 11 check digits, they will be transmitted along with your bar code data from the TriCoder to your host.

oFor more information regarding MSI or Plessey Code, see Appendix K: MSI Plessey Code.

34

Page 35
Image 35
Worth Data 5000 owner manual Code, MSI/Plessey