Parity
I/O SETTINGS |
|
|
HOST | SERIAL | 1 |
TERMINATOR CHARACTER - CR | 2 | |
SINGLE CYCLE UPLOAD | OFF 3 | |
BAUD RATE | 9600 | 4 |
PARITY | NONE | 5 |
DATA BITS | 8 BITS | 6 |
PROTOCOL | NONE | 7 |
DONE/EXIT | 0 | |
CHANGE SETTING #: _
oThe Parity should match the parity setting of your COM port setting on your Host Computer. Parity can vary on a PC serial port - None is the default and is usually used in conjunction with the 8 data bits setting, while Even or Odd is associated
with 7 data bits.
oChange the Parity by pressing the 5 key on the TriCoder keypad
Data Bits
I/O SETTINGS |
|
|
HOST | SERIAL | 1 |
TERMINATOR CHARACTER - CR | 2 | |
SINGLE CYCLE UPLOAD | OFF 3 | |
BAUD RATE | 9600 | 4 |
PARITY | NONE | 5 |
DATA BITS | 8 BITS | 6 |
PROTOCOL | NONE | 7 |
DONE/EXIT | 0 | |
CHANGE SETTING #: _
oSet the Data Bits to match the setting used by your serial port. 8 data bits is the default.
oChange the Data Bits by pressing the 6 key on the TriCoder keypad to cycle through 7 BITS or 8 BITS.
Protocol
I/O SETTINGS |
|
|
HOST | SERIAL | 1 |
TERMINATOR CHARACTER - CR | 2 | |
SINGLE CYCLE UPLOAD | OFF 3 | |
BAUD RATE | 9600 | 4 |
PARITY | NONE | 5 |
DATA BITS | 8 BITS | 6 |
PROTOCOL | NONE | 7 |
DONE/EXIT | 0 | |
CHANGE SETTING #: _
oSet the Protocol to match the setting used by your program. None is the default.
oChange the Protocol by pressing the 7 key on the TriCoder keypad to cycle through NONE, XON/XOFF or ACK/NAK.
39
