56
The Hardware Utilities will let you know when your transmission is finished.
Full Speed USB Downloads
If you are downloading from your computer to your TriCoder via the Full Speed USB interface, the only thing you need to do on your
TriCoder is make sure it is set for Full Speed USB and turn it on! The Hardware Utilities program will take care of the rest!
Program File Downloads
1. Make sure you are connected to the C22 USB cable and that your TriCoder is on.
2. Start Hardware Utilities if it isn't already running.
3. Click the TriCoder Manager tab
4. The middle panel is showing you your co mputer files. Find the folder and file name o f the program you want to download in
the middle panel and click to highlight it.
5. Choose the program file in the right panel (these are the programs already in your TriCoder) that you want to replace
6. Click on the left arrow between the panels. That's it!
Table Downloads
1. Again, make sure you are connected to the USB cable and that your TriCoder is turned on.
2. Start the Hardware Utilities if it isn't already running.
3. Your TriCoder program must already be configured to look up data in a table file.
4. Click the TriCoder Manager tab.The middle panel is showing you the files on your computer. Find the folder and file name
5. of the table you want to download in the middle panel and click to highlight it (we recommend using the file extension .tbl
for table files).
6. Click on the table in the right panel
7. Click on the right arrow between the panels and you are done!