Daewoo DF-8100 Troubleshooting, Turn on the TV, Audio cables are not connected securely

Editing

Troubleshooting

Check the following guide for the possible cause of a problem before contacting customer support.

Hide Chapters

Symptom Cause Solution

This feature allows you to hide or unhide a chapter. After hiding a chapter, the chapter is not deleted but only hidden. If a chapter is hidden then it shows ‘Unhide Chapter‘ and vice versa.

DVD Edit

Title	1 of 2
Chapter	1 of 11
Edit Chapters
Hide Chapter

Change Index Picture Split Title

Instructions Enter-Confirm Setup-Exit Move …†

No power.

No picture.

The power cord is disconnected.

The TV is not set to receive DVD Recorder+VCR signal output.

The video cable is not connected securely.

The TV power is turned off.

Plug the power cord into the wall outlet securely.

Select the appropriate video input on the TV so the picture from the DVD Recorder+VCR appears on the TV screen. Connect the video cable securely.

Turn on the TV.

Change Index Picture

Each title displayed in the Playlist menu is represented by a thumbnail picture taken from the start of that title or chapter. If you prefer, you can select a different still picture from within the title.

1Use […†] to select ‘Change Index Picture‘.

2Press [ENTER] to display the submenu.

3Use […†] to select ‘Yes‘ if you prefer to change the picture.

4Press [ENTER] when the preferred picture is on your TV screen.

Split Title

This feature allows you to split a title into two titles.

1Use […†] to select 'Split Title'.

2Press [ENTER] to display the submenu.

3Use […†] to select 'Yes' if you prefer to split the title.

4Press [ENTER] to confirm. It may take a few minutes to split the title.

• Split Title may take several minutes.

DVD Edit

Title	1 of 2
Chapter	1 of 11
Edit Chapters		Change Picture
Hide Chapter
Change Index Picture		Are you sure?
Split Title		Yes
Instructions		No
Enter-Confirm Setup-Exit
Move …†

DVD Edit

Title	1 of 2
Chapter	1 of 11
Edit Chapters		Split the title
Hide Chapter
Change Index Picture		in two?
Split Title		Yes
Instructions		No
Enter-Confirm Setup-Exit
Move …†

Split Title

Splitting title into 2 titles.

Please wait a moment....

Instructions

Setup-Exit

No sound.

Playback picture is poor.

DVD Recorder+VCR does not start playback.

Picture from external input is distorted.

Some channels are skipped over when using [PR+/–]. Picture or sound of broadcasting channel is weak or missing. Camcorder image not

shown.(DF-8100P/8150P only)

Camcorder image via A/V input to DVD Recorder+ VCR is not shown on TV screen.

Can’t play disc recorded on this DVD Recorder+VCR on another DVD player.

The equipment connected with the audio cable is not set to receive DVD Recorder+VCR signal output.

The audio cables are not connected securely.

The power on the equipment connected with the audio cable is turned off.

The audio cables are damaged. The disc is dirty.

Tape heads are dirty.

Tape is a rental or was recorded on another VCR.

No disc is inserted. No tape is inserted.

An unplayable disc is inserted.

The disc is placed upside down.

The disc is not placed within the guide.

The disc is dirty.

The Parental Control level is set.

The video signal from the external component is copy-protected.

The skipped channels were deleted with the ‘Adjust Channels’ feature. Antenna or cables are loose.

Wrong Tuning Band is selected in the DVD Recorder+VCR Setup menu. Camcorder is off.

DVD Recorder+VCR’s source is not set to AV1, AV2, AVF, or DV.

(DV : DF-8100P/8150P only)

The disc was not finalized (or not made compatible if using a DVD+RW). Some players will not play even a finalized disc.

Select the correct input mode on the audio receiver so you can listen to the sound from the DVD Recorder+VCR.

Connect the audio cables securely.

Turn on the equipment connected with the audio cable.

Replace with new ones. Clean the disc.

Clean the video heads.

Use [Tracking +/–] for manual tracking adjustment while a tape is playing. Insert a disc or tape. (Check that the disc indicator on the front panel display is lit.) Insert a playable disc. (Check the disc type, color system, and regional code.) Place the disc with the playback side down.

Place the disc on the disc tray correctly inside the guide.

Clean the disc.

Cancel the Parental Control function or change the rating level.

You cannot connect via the DVD Recorder+VCR. Connect the component directly to your TV.

Use the ‘Adjust Channels’ feature to restore channels.

Tighten connections or replace cable. Try all ‘Auto Set‘ options; see page 23 for details.

Turn camcorder on and operate properly.

Use [INPUT] to select AV input channel (AV1, AV2, AVF, or DV).

Finalize the disc; see page 53.

No solution.

EDITING

REFERENCE

58 59