Initial Setup

VCR

On-Screen Displayi l Overviewverview

The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loaded disc or tape. To access the On-Screen Display (or OSD), press [DISPLAY].

This feature enables you to search for Index marks or specific times on your VHS tapes.

1While ‘Preferences‘ is selected, press [] to move to the second level.

2Use [/] to select ‘VCR‘.

3Press [ENTER] to display the submenu.

4Select ‘Index+’, ‘Index–’ or ‘Go to Zero’.

5If you select ‘Index+’ (or ‘Index–’) and press [ENTER], your DVD Recorder+ VCR will locate your index mark and begin playback.

Preferences

Video

Audio

Parental Controls

Auto Settings

VCR

Instructions

Enter-Confirm Setup-Exit Move …†

Displaying Disc Information

To display information about the currently loaded disc or tape:

On-screen display operation

1Press [DISPLAY] repeatedly to display/change the information displayed on-screen.

2To remove the on-screen display, press [DISPLAY] repeatedly until it disappears.

See the descriptions below for detailed explanations of the on-screen displays for each media type.

6If you select ‘Go-To Search’ and press [ENTER], your DVD Recorder+ VCR will wind to the position 0:00:00

and stop.

VCR

 

 

VCR

 

 

VCR

 

 

 

 

 

 

Index+

 

 

 

Index+

 

 

Index+

 

 

Index–

 

 

 

Index–

 

 

 

Index–

 

 

Go to Zero

 

 

 

Go to Zero

 

 

 

Go to Zero

 

• Some discs may not provide all the features shown in the on-screen display examples.

Temporary Feedback Icons

Action prohibited or not available

SETUP

• The VCR menu is activated only when a video cassette tape is inserted.

System Information

System Information helps service personnel identify key firmware information about your DVD Recorder+VCR in case service is required.

Restore Defaults

System Info

Version

EP Set 1.0

Main Build

DR3-1.0.2

Micom Software

0.0.0

DVD Navigation

1.0.0

Loader Version

DVS-RA20

Instructions

Enter-Confirm Setup-Exit

Move …†

Changing TV Channels

If no disc is playing, you can change TV channels using the [0-9] or [PR+/–] buttons on the remote control or [PR+/–] buttons on the front panel.

Changing the TV Audio Channel

You can change the TV audio using the [AUDIO] button.

Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below.

• STEREO Audio Signal

Stereo Mono Stereo

• BIL Audio Signal

BIL I BIL II (BIL Off) BIL I

PLAYBACK

If you wish, you can reset the DVD Recorder+VCR to its original factory settings.

• MONO Audio Signal

Mono

1Press [SETUP].

2Use [œ/] to select ‘Restore Defaults‘.

3Press [ENTER].

4The Initialize menu will appear. Use the [/] buttons to select ‘Yes‘ and press [ENTER].

Some options cannot be reset, including Parental Controls, Password, and Country Code.

Restore Defaults

If you select this function all

settings will be removed and

Are you sure you want to restore the product will be set into

default settings? initial (factory) mode.

Yes

No

Instructions

Enter-Confirm Setup-Exit

Move …†

The current audio channel is displayed on-screen.

If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.

When an external input is selected, the audio channel can be switched only to Stereo.

After Restoring Defaults the unit reboots automatically and the Installation menu appears. You must set the country, language, channel, and clock settings again.

32

 

 

 

33

 

 

Page 18
Image 18
Daewoo DF-8100 user manual On-Screen Displayi l Overviewverview