5 The decoded information appears after confirmation. You can go back at any time to change the information by pressing [ENTER]. Select the appropriate input field using […†]. If required, change the information using […†].
If all the information is correct, press the [ENTER] button. The programming information is stored in a TIMER block.
6 Press [SETUP] to exit the Timer Record List.
7 Timer indicator will light or blinking. Power Off the DVD Recorder+VCR to start the Timer Recording.
• VideoPlus is not available for some countries.
48
Press [ENTER] to confirm.
4
If you make a mistake, you can clear it with [CLEAR].
e.g.: 5-234-89 or 5 234 89
Enter 523489 for the ‘VideoPlus’ number.
Enter the entire ‘VideoPlus’ number. This number is up to 9 digits long and can be found next to the start time of the TV programme in your TV listings megazine.
The ‘VideoPlus’ menu appears.
Select ‘VideoPlus’ with [/] and confirm with [ENTER].
3
The ‘Please Select Record Method’ menu appears.
Insert recordable media such as DVD+R ,DVD+RW, recordable VHS tape. Press [TIMER].
1
2
Timer Recording
PR No. Date Start
Enter-EditSetup-Exit Move …†
– – – – – – – – –
Please enter your VideoPlus Code.
Please Select Screen for Entering Set Record Details.
Manual Set Record Screen VideoPlus
Instructions
Enter-ConfirmSetup-Exit Move …†
Please Select Record Method
Timer Recording using VideoPlus system
Thanks to this programming system, you no longer need to tediously enter the date, programme number, start and end time. All the information needed by the DVD recorder for programming is contained in the VideoPlus programming number. This VideoPlus number is found in most TV listings.
Instructions
VideoPlus

Timer Recording

End Mode

PR03 01/02 13:30 14:30 HQ

------/-- --:-- --:-- ---

------/-- --:-- --:-- ---

------/-- --:-- --:-- ---

------/-- --:-- --:-- ---

------/-- --:-- --:-- ---

------/-- --:-- --:-- ---

------/-- --:-- --:-- ---

Instructions

Enter-Edit Setup-Exit Move …†

Edit Timer

Media

 

PR No.

PR-03

Date

Jan/02 Sun

Start

13:30

End

14:30

Mode

HQ

Repeat

Once

Delete

Instructions

Enter-Save Setup-Exit

Timer Recording

Canceling a Timer Recording

You can clear a Timer Recording any time before the recording actually starts.

Use […†] to select the program you want to erase on the Timer Recorder List, then press [ENTER] to modify it. Use [œ √] to select 'Delete' then press [ENTER].

Stopping a Timer Recording in Progress

After a Timer Recording has started, you can still cancel the program by pressing and holding [STOP] for 3 seconds.

Timer Recording Troubleshooting

Even if a Timer Recording is set, the DVD Recorder+VCR will not record if:

No disc is loaded.

A non-recordable disc is loaded.

DISC Lock is set to ON in the DISC Settings menu; see page 52.

There are already 49 titles recorded on the disc.

You cannot enter a Timer Recording if:

A recording is already under way.

The start time has already passed.

Eight Timer Recordings have already been set.

If two or more Timer Recordings overlap:

• The earlier program takes priority.

RECORDING

 

When the earlier program finishes, the later program starts.

 

If two programs are set to start at exactly the same time, the program entered first takes priority.

 

Confirmation is not possible when:

The DISC Protect setting is set to ON.

There are already 49 titles recorded on the disc.

If the disc is damaged, the recording may not complete successfully, even if the Check field shows ‘Rec. OK‘.

Recording Priority

Timer Recording and OTR (One Touch Record) have the same priority but they have lower priority than manual recording. During manual recording, Timer Recording or OTR will be ignored.

49

Page 26
Image 26
Daewoo DF-8100 user manual Earlier program takes priority, When the earlier program finishes, the later program starts