Recording from an External Input
Recording from External Components
You can record from an external component, such as a camcorder or VCR, connected to any of the DVD Recorder+VCR’s external inputs.
1Make sure the component you want to record from is connected properly to the DVD Recorder+VCR; see pages 15~18.
2Use
3Load a recordable disc or tape.
4Set the desired Recording mode by pressing [REC SPEED] repeatedly.
DVD: HQ (High Quality - 1 hr/disc), SP (Standard Play - 2 hrs/disc), EP (Extended Play - 4 hrs/disc), or SLP (Super Long Play - 6 hrs/disc).
VCR: SP (Standard Play), LP (Long Play - 2 times SP)
5Press [REC (●)] once.
Recording will start. The REC indicator lights on the front panel display.
Recording continues until you press [STOP] or the disc is full.
To record for a fixed length of time, see ‘One Touch Record‘ on page 44.
6Press [STOP (■)] to stop recording.
Note
•If your source is
Recording from a Digital Camcorder |
| |
|
You can record from a digital camcorder connected to the DV IN jack on the front panel of the DVD Recorder+VCR.
You can use the DVD Recorder+VCR remote to control both the camcorder and the DVD Recorder+VCR. Before recording, make sure the digital camcorder is properly connected to the front panel DV IN jack; see page 18.
The source signal must be DVC SD format.
Some camcorders cannot be controlled using the DVD Recorder+VCR remote.
If you connect a second DVD recorder using a DV cable, you cannot control the second recorder from this one. You cannot control the DVD Recorder+VCR remotely from a component connected to the DV IN jack.
You cannot record date and time information from a DV cassette.
1Make sure your digital camcorder is connected to the front panel DV IN jack; see page 18.
2Press [INPUT] repeatedly to select the DV input.
DV appears on the front panel display and the TV screen.
3Find the place on the camcorder tape from which you want to start recording.
For best results, pause playback at the point you want to start recording. Depending on your camcorder, you can use the DVD Recorder+VCR remote to control the camcorder using the STOP, PLAY, and PAUSE functions.
4Press [REC] once to start recording.
Recording is automatically stopped if the DVD Recorder+VCR detects no signal. You can pause or stop the recording by pressing [PLAY/PAUSE] or [STOP]. You cannot control the camcorder from the remote control during recording.
Recording from an External Input
What is DV? | |
|
Using DV, also known as i.LINK, you can connect a
The i.LINK interface is also known as IEEE
•The DVD Recorder+VCR is only compatible with
•You cannot connect more than one DV camcorder at a time to the DVD Recorder+VCR.
•You cannot control the DVD Recorder+VCR from external equipment connected via the DV IN jack (including two DVD Recorders).
•It may not always be possible to control the connected camcorder via the DV IN jack.
•Audio input to the DV IN jack should be 32 or 48kHz (not 44.1kHz).
•Picture disturbance on the recording may occur if the source component pauses playback or plays an unrecorded section of tape, or if the power fails in the source component, or if the DV cable becomes disconnected.
RECORDING
50 |
|
|
| 51 |
|
|
