Vornado vornado whole room heater manual How To Use, Advanced Safety Features, Tight Grill Spirals

How To Use Advanced Safety Features

Resetting Your Vornado Heater

Your Vornado Heater has a multi-level safety shut-off system designed to prevent overheating. Overheating may occur when the inlets or outlet are blocked, a foreign object prevents the blade from turning, or the appliance tips over. If this happens, the safety shut-off system will cut power to the heat element and you will need to manually reset the heater.

1.Set the Power switch to Off and unplug the unit.

2.Remove any obstructions.

3.Wait 5 –10 minutes, allowing the unit to cool down.

4.Plug in the unit and place in desired position.

5.Set the Power switch to On. Your Vornado Heater should now

function normally.

Note: If the safety shut-off system repeatedly shuts off your heater or if it will not reset after following the above procedure, DO NOT ATTEMPT TO DISASSEMBLE THE UNIT. Call Vornado Consumer Services Department toll-free at 1-800-234-0604.

Tight Grill Spirals

Resists curious fingers.

Cool Touch Case

Safe to touch, even on high heat setting.

Automatic Safety Shut Off System

If airflow becomes blocked and overheating occurs, power to the heating element and fan is shut off.

Tip-Over Switch Protection

If tipped more than 10 degrees in any direction, heat and fan functions immediately shut down.

Ideal 120°F Exit Air Temperature

Warm enough to heat an entire room.

8English