A – Command Line Interface

0

 

 

Set Config Command

 

 

 

 

 

 

 

 

 

 

 

 

 

Table A-20. Set Config Switch Parameters (Continued)

 

 

 

 

 

Parameter

Description

 

 

 

 

 

 

InteropMode

Propagates just the active zone set throughout the

 

 

 

 

fabric (Standard, FC-SW-2 compliant) or the entire

 

 

 

 

zoning database (Interop-1, non-compliant). The

 

 

 

 

default is Standard.

 

 

LegacyAddressFormat

Available only when the InteropMode parameter is

 

 

 

 

Interop-1, this parameter enables (True) or disables

 

 

 

 

(False) the use of legacy address formatting for

 

 

 

 

interoperating with non-FC-SW-2 switches. The

 

 

 

 

default is False.

 

 

 

 

 

 

A-66

59097-01 A

Page 240
Image 240
Sun Microsystems 5602 manual Table A-20. Set Config Switch Parameters