0

5 – Managing Ports

 

 

Resetting a Port

 

 

 

 

3.Designate Donor Ports: Select available ports and click >> to move the port into the Selected Donor Port column shown in Figure 5-3. Match the number of ports needed with the number of designated donor ports. Click the Next button.

Figure 5-3. Designate Donor Ports

4.Verify Requested Changes: Review the extended distance requests and the selected donor ports. Click the Finish button to apply the changes, and redistribute the credits.

Note: As credits are used, the Logged-In LEDs on the corresponding donor ports illuminate continuously. In addition, donor port Activity LEDs will reflect the same traffic as the recipient port. Donor ports whose credits are being used are unavailable to devices that are connected to them.

5.4

Resetting a Port

The Reset Port option reinitializes the port using the saved configuration. To reset a port, do the following:

1.In the faceplate display, select the port(s) to be reset.

2.Open the Port menu and select Reset Port.

59097-01 A

5-15

Page 163
Image 163
Sun Microsystems 5602 manual Resetting a Port, Designate Donor Ports