Sun Microsystems 5602 manual Following is an example of the Group Edit command, Isl

0	A – Command Line Interface
	Group Command

Examples The following is an example of the Group Add command:

SANbox Manager (admin-security)			#> group add Group_1
A list of attributes		with formatting and default		values will follow
Enter a new value or		simply press the ENTER key to accept the current value
with exception of the Group Member WWN field which is mandatory.
If you wish to terminate this			process before reaching the end of the list
press 'q' or 'Q' and		the ENTER key to do so.
Group Name	Group_1
Group Type	ISL
Member	(WWN)			[00:00:00:00:00:00:00:00]
Authentication	(None / Chap)			[None	]
PrimaryHash	(MD5	/ SHA-1)		[MD5	]
PrimarySecret	(32 hex or 16		ASCII char value)	[	]
SecondaryHash	(MD5	/ SHA-1 / None)		[None	]
SecondarySecret	(40 hex or 20		ASCII char value)	[	]
Binding	(domain ID 1-239, 0=None)			[0	]
Finished configuring		attributes.
To discard this	configuration		use the security cancel command.

The following is an example of the Group Edit command:

SANbox Manager (admin-security) #> group edit G1 10:00:00:c0:dd:00:90:a3

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so.

Group Name	g1
Group Type	ISL
Group Member	10:00:00:c0:dd:00:90:a3
Authentication	(None /	Chap)	[None]		chap
PrimaryHash	(MD5 / SHA-1)		[MD5	]	sha-1
PrimarySecret	(40 hex	or 20 ASCII char value) [		]	12345678901234567890
SecondaryHash	(MD5 / SHA-1 / None)		[None]		md5
SecondarySecret	(32 hex	or 16 ASCII char value) [		]	1234567890123456
Binding	(domain	ID 1-239, 0=None)	[3	]

Finished configuring attributes.

To discard this configuration use the security cancel command.

59097-01 A A-31