Legacy Port Address Format, Timeout Values | Sun Microsystems 5602

4 – Managing Switches	0
4 – Managing Switches
Configuring a Switch

4.7.3.2

Legacy Port Address Format

Legacy Address Format should be enabled only to permit interoperation with certain older non-FC-SW-2 compliant switches. Enabling this setting under other circumstances will disable zoning that is defined by domain ID and port number. This Legacy Address Format option is available only when the Interop_1 setting is enabled on the Advanced Switch Properties dialog. Contact your authorized maintenance provider for assistance in using this feature. Refer to the QLogic Switch Interoperability Guide on the QLogic Web site for a complete discussion of configuring for operation with non-Qlogic Switches.

Note: The Legacy Address Format setting must be the same on all switches in the fabric, otherwise the inter-switch links will not connect.

4.7.3.3

Timeout Values

The switch timeout values determine the timeout values for all ports on the switch. Table 4-5describes the switch timeout parameters. The timeout values must be the same for all switches in the fabric.

Note: Mismatched timeout values will disrupt the fabric. These should not be changed unless absolutely necessary. Therefore, the switch must be offline to change these values. Use the Switch Properties dialog to take the switch offline.

	Table 4-5. Timeout Values

Parameter	Description

R_A_TOV	Resource Allocation Timeout: Represents the maximum time a frame
	could be delayed in the Fabric and still be delivered. The default is
	10000 milliseconds.
E_D_TOV	Error Detect Timeout: Represents the maximum round trip time that
	an operation between two N_Ports could require. The default is 2000
	milliseconds.

4-24	59097-01 A

Image 128

Sun Microsystems 5602 manual Legacy Port Address Format, Timeout Values

Contents

SANbox 5602 Switch Management User’s Guide SANbox 5602 Switch Management User’s Guide Document Revision History Table of Contents Section Managing Fabrics 11.612.1 12.2 5.1 5.24.1 3.1 Section Managing Switches Devices Data Window Switch Data Window 2.4 2.52.6 14.1 Appendix a Command Line Interface Section Managing Ports Backing up and Restoring Switch Configurations 106109 112 Glossary Index Port Threshold Alarm Configuration Dialog Tables 134 Jdom License Intended AudienceRelated Materials Technical Support Contact Information AvailabilityTraining Introduction Technical Support 59097-01 a Using SANsurfer Switch Manager Workstation Requirements Installing the Management ApplicationWorkstation Requirements SANsurfer Switch Manager For a Windows platformFor a Linux platform For a Solaris platform For a Mac OS X platform SMS Installation for WindowsSANsurfer Management Suite Chglax.bat SMS Installation for Linux Chmod +x sansurferswitchmgrlinux5.02.xx.bin SMS Installation for Solaris Locate and execute the file sbmoversms.sh Install the new SANsurfer Switch Manager packageChange directories to the package location Starting SANsurfer Switch Manager ‰ For Linux or Solaris enter the SANsurfer command Initial Startup Dialog Exiting SANsurfer Switch Manager SANsurfer Switch Manager Window Uninstalling SANsurfer Switch Manager View file upon exit future SANsurfer Switch Manager sessions SMS Uninstall Installdirectory/UninstallData/SANsurferUninstaller Standalone Uninstall Changing the Encryption Key for the Default Fabric View File Setting SANsurfer Switch Manager Preferences Saving and Opening Fabric View Files Preferences Dialog SANsurfer Switch Manager Using Online Help Viewing Software Version and Copyright Information Faceplate Display SANsurfer Switch Manager User InterfaceTopology Display Menu Bars Topology Display Menu Faceplate Display Menu Shortcut Keys Tool Bar Tool Bar Buttons Fabric Tree Fabric Tree Data Window and Tabs Working Status IndicatorGraphic Window Using the Topology Display Switch and Link Status Arranging Switches in the Display Working with Switches and LinksSelecting Switches and Links Opening the Faceplate and Topology Display Popup Menus Topology Data Windows Using the Faceplate Display Port Views and Status Opening the Faceplate Popup Menu Working with PortsSelecting Ports Faceplate Data Windows Managing Fabrics Radius Servers Adding a Radius Server Add Radius Server Managing Fabrics Removing a Radius Server Remove Radius Server Editing Radius Server Information Edit Radius Server Information Modifying Authentication Order Radius Server Information Modify Authentication Order Radius Server Information Fabric security consists of the following Securing a FabricConnection Security Security Consistency Checklist User Account Security Device Security Edit Security Dialog Edit Security Dialog Creating a Security Set Create Security Group Dialog Create Security Group Dialog Creating a Security Group Create Security Group Member Dialog Create a Security Group Member Dialog Creating a Security Group Member Editing the Security Configuration on a Switch Using the Security Config Dialog Viewing Properties of a Security Set, Group, or Member Deactivating a Security Set Archiving a Security Configuration to a FileActivating a Security Set Active Security Data Window Configured Security Data WindowFabric Services Enabling Snmp Configuration Click the In-band Management Enable buttonEnabling In-band Management Tracking Fabric Firmware and Software Versions Viewing and Comparing Version Snapshots Exporting Version Snapshots to a File Managing the Fabric Database Adding a Fabric Removing a Fabric Opening a Fabric View File Rediscovering a Fabric Deleting Switches and LinksSaving a Fabric View File Adding a New Switch to a Fabric Replacing a Failed Switch Displaying Fabric Information Fabric Status Topology Display Switch and Status Icons Switch Icon Description Displaying the Event Browser 11. Events Browser Severity Levels Description Icon Filtering the Event Browser 12. Filter Events Dialog Sorting the Event Browser Saving the Event Browser to a File Devices Data Window Devices Data Window Entries Active Zone Set Data Window 13. Active Zone Set Data Window SANsurfer Switch Manager enables you to do the following Link Data WindowWorking with Device Information and Nicknames Displaying Detailed Device Information Creating a Nickname Exporting Device Information to a FileManaging Device Port Nicknames Exporting Nicknames to a File Editing a NicknameDeleting a Nickname Zoning Concepts Importing a Nicknames FileZoning a Fabric Zones Soft Zones Zone Sets Access Control List Hard ZonesAliases Zoning Database Managing the zoning database consists of the following Using the Zoning WizardManaging the Zoning Database Editing the Zoning Database 15. Edit Zoning Dialog Managing Fabrics Zoning a Fabric Edit Zoning Dialog Tool Bar Buttons and Icons Configuring the Zoning Database Interop Auto Save Default Visibility Discard InactiveSaving the Zoning Database to a File Restoring the Zoning Database from a File Restoring the Default Zoning Database Removing All Zoning Definitions Managing Zone Sets Creating a Zone Set Activating and Deactivating a Zone Set Copying a Zone to a Zone Set Removing a Zone from a Zone Set or from All Zone Sets Removing a Zone Set Managing Zones Managing zones involves the following Creating a Zone in a Zone Set Adding Zone Members Renaming a Zone or a Zone Set Removing a Zone MemberRemoving a Zone from a Zone Set Removing a Zone from All Zone Sets Creating an Alias Changing Zone TypesManaging Aliases Adding a Member to an Alias Removing an Alias from All Zones Zone Merge Failure Zone Merge Failure RecoveryMerging Fabrics and Zoning Managing Switches Managing User Accounts Factory User Accounts User Account Administration Dialog Add Account Creating User Accounts User Account Administration Dialog Remove Account Removing a User Account Changing a User Account Password User Account Administration Dialog Change Password User Account Administration Dialog Modify Account Modifying a User Account Displaying Switch Information 5shows the faceplate display for the SANbox 5602 switch Switch Data Window Switch Data Window Entries Ratov Switch Data Window Entries Displaying Detailed Device Information on page 3-35for Port Statistics Data Window Port Information Data Window Configured Zonesets Data Window Configured Zonesets Data Window Configuring Port Threshold Alarms Port Threshold Alarm Configuration Dialog Paging a Switch EventCount Sample Window Setting the Date/Time and Enabling NTP Client Resetting a Switch Switch Resets Type Description Configuring a Switch Using the Configuration Wizard Switch Properties Symbolic Name Switch Administrative States Switch Administrative States Domain ID and Domain ID Lock Fabric Device Management Interface Broadcast Support In-band Management Advanced Switch Properties Interop Mode for Zoning Legacy Port Address Format Timeout ValuesTimeout Values System Services Dialog 11. System Services Dialog Security Consistency Checklist Dialog Network Properties 12. Network Properties Dialog IP Configuration IP Configuration Parameters Remote Logging NTP Client Snmp Properties 13. Snmp Properties Dialog Snmp Configuration Snmp Configuration Parameters Snmp Trap Configuration Snmp Trap Configuration Parameters Managing Switch Stacks 14. Switch Stacks Managing Switches Managing Switch Stacks Information SyslogSelect Source Dialog Archiving a Switch Restoring a Switch 16. Restore Dialogs Full and Selective Managing Switches Restoring a Switch Restoring the Factory Default Configuration Factory Default Configuration Settings Factory Default Configuration Settings Upgrading the Switch Using License Keys Downloading a Support File Installing Firmware 17. Features License Key Dialog Managing Switches Displaying Hardware Status 19. Hardware Status LEDs Managing Ports Displaying Port Information Port Types Monitoring Port StatusDisplaying Port Types Displaying Port Operational States Displaying Port SpeedsPort Operational States Port Speeds Displaying Transceiver Media Status Port Transceiver Media View Port Statistics Data Window Entries LIP ALPD,ALPS Port Statistics Data Window Entries Port Information Data Window Entries Port Information Data Window Entries Configuring Ports Port Properties Dialog Changing Port Administrative States Port Administrative States Changing Port Speeds Changing Port Types Stream Guard Device Scan Changing Port Symbolic NameUsing the Extended Credits Wizard Resetting a Port Designate Donor Ports Testing Ports Port Loopback Test Dialog Managing Ports Graphing Port Performance Fabric View Graphs Exiting SANsurfer Performance Viewer This section describes how to do the followingStarting SANsurfer Performance Viewer Save Default Performance View File Dialog Changing the Default Performance View File Encryption Key Saving and Opening Performance View Files Setting SANsurfer Performance Viewer Preferences Setting the Polling Frequency Displaying Graphs for a Switch Displaying Graphs for a Stack Arranging Graphs in the Display Customizing Graphs Managing Ports Setting Global Graph Type Rescaling a Selected GraphPrinting Graphs Saving Graph Statistics to a File Command Line Interface Logging On to a Switch Working with Switch Configurations User Accounts Modifying a Configuration Backing up and Restoring Switch Configurations Ftp ipaddress Commands Command syntax is as followsCommand keyword keyword value Table A-1. Command-Line Completion Table A-2. Commands Listed by Authority Level Admin Session Commands Admin Command AuthoritySyntax Keywords Alias Command Syntax alias Rename aliasold aliasnew Members aliasRemove alias memberlist CIM Command CIMListener Command Table A-3. CIM Listener Configuration Parameters Following is an example of the CIMListener Create command Enter CIMSubscription Command Table A-4. CIM Subscription Configuration Parameters # cimsubscription create subscription1 Config Command Syntax configKeywords activate configname Edit configname Restore Manager Archive function are not compatible with the ConfigRestore command Save configname #ftp symbolicname or ipaddress user images Create Command CreateCertificate Support Command Line Interface Create Command Following is an example of the Create Certificate command Keywords MMDDhhmmCCYY Date CommandSyntax date Authority Admin Feature CommandSyntax feature Command Line Interface Firmware Install Command Group Command Syntax group Keywords add group Table A-5. ISL Group Member Attributes Table A-6. Port Group Member Attributes Copy groupsource groupdestination Create group type Edit group member Table A-8. Group Member Attributes Members group Remove group memberlistRename groupold groupnew Securitysets group Following is an example of the Group Edit command ISL Following is an example of the Group List command Following is an example of the Group Members command Hardreset Command Syntax Help Command Keywords commandSyntax help command keyword Authority None History Command Authority None Syntax history Hotreset Command Hotreset Image Command Ftp Ftp switchname SANbox Manager admin # image install Wait for the unpack to complete Lip Command Following is an example of the Lip commandReinitializes the specified loop port Lip portnumber Passwd Command Syntax passwd accountname Keywords accountname Ping Command Syntax ping ipaddress Keywords ipaddress Ps Command Following is an example of the Ps commandSyntax Examples Displays current system process information Syntax quit, exit, or logout Quit CommandCloses the Telnet session Reset Command Config configname Services SwitchSecurity Snmp Table A-9. Switch Configuration Defaults Values Table A-10. Port Configuration Defaults Parameter Gbps/2-Gbps Port Gbps Port Defaults Table A-11. Port Threshold Alarm Configuration Defaults Table A-12. Zoning Configuration Defaults Table A-13. Snmp Configuration Defaults Table A-14. Radius Configuration Defaults Table A-15. Services Configuration Defaults Table A-16. System Configuration Defaults Table A-17. Security Configuration Defaults Security Command Keywords active History MD5 Following is an example of the Security History command Following is an example of the Security Limits command Following is an example of the Security List command Securityset Command Delete securityset Groups securitysetRemove securityset group Rename securitysetold securitysetnew Set Command Syntax set Setup option Switch statePagebreak state Port option Set Config Command Set configTable A-18. Set Config Port Parameters Port portnumber Command Line Interface Set Config Command Table A-18. Set Config Port Parameters Table A-19. Security Configuration Parameters Table A-20. Set Config Switch Parameters Table A-20. Set Config Switch Parameters Table A-21. Set Config Threshold Parameters Threshold Table A-22. Set Config Zoning Parameters Arbff Enter key to do so Configuring Port Number AdminState Following is an example of the Set Config Security command Following is an example of the Set Config Switch command # set config switch Following is an example of the Set Config Threshold command Following is an example of the Set Config Zoning command Set Log Command Set logArchive Component filterlist Snmp Display filter Level filter Port portlistStart Stop Alarms are always logged and always displayed on the screen Set Port Command State state Set Setup Command Set setupRadius Services Snmp System Configuration fields Command Line Interface Set Setup Command Table A-24. Switch Services Settings Table A-24. Switch Services Settings Table A-25. Snmp Configuration Settings Table A-26. System Configuration Settings Table A-26. System Configuration Settings Following is an example of the Set Setup Services command Current value Following is an example of the Set Setup Snmp command Following is an example of the Set Setup System command Setup system Show Command Keywords about Alarm option Cimlistener listenernameCimsubscription subscriptionname Fdmi portwwn Log option LsdbNs option Pagebreak Table A-27. Show Port Parameters Tbuf LIPF8ALPS Post log Steering domainid Table A-28. Switch Operational Parameters WhoamiZoneset Active, List „ Zoning History, Limits, List Displays the current time zone setting TopologyDisplays all connected devices Users Following is an example of the Show Fdmi command Following is an example of the Show Domains commandFollowing is an example of the Show Fabric command Following is an example of the Show Fdmi WWN command Following is an example of the Show NS local domain command Following is an example of the Show Interface command Following is an example of the Show NS domainID commandFollowing is an example of the Show NS portID command Following is an example of the Show Port command PL-XPL-VC-SG3-22 Following is an example of the Show Switch command Following is an example of the Show Topology command 104 59097-01 a Following is an example of the Show Version command Show Config Command Show config Following is an example of the Show Config Switch command Following is an example of the Show Config Threshold command Following is an example of the Show Config Zoning command Show Log Command NoneShow log Keywords numberofevents Settings Zoning Monitors zoning conflict eventsLevel Options Following is an example of the Show Log command Following is an example of the Show Log Level commandFollowing is an example of the Show Log Options command Show Perf Command Show perfPortnumber Stop the display Following is an example of the Show Perf command Following is an example of the Show Perf Byte command Mfg Show Setup CommandShow setup Following is an example of the Show Setup Radius command Following is an example of the Show Setup Snmp command Following is an example of the Show Setup System command Shutdown Shutdown CommandPower from the switch Test Command TestPort portnumber testtype Status Admin start Test port x online Authority None Syntax uptime Uptime CommandExamples The following is an example of the Uptime command User Command UserAccounts Add Following is an example of the User Add command Following is an example of the User Edit command Following is an example of the User Delete command Following is an example of the User List command Whoami Whoami CommandFollowing is an example of the Whoami command Zone Command Syntax zone Members zone Remove zone memberlistRename zoneold zonenew Type zone zonetype Following is an example of the Zone Members command Following is an example of the Zone Zonesets command Zoneset Command Syntax zoneset Following is an example of the Zoneset List command Following is an example of the Zoneset Zones commandRemove zoneset zonelist Rename zonesetold zonesetnew Zoning Command Opens a Zoning Edit session Table A-29. Zoning Database Limits Limit Description Following is an example of the Zoning Limits command E1JBOD1 E2JBOD2 Following is an example of the Zoning List command Access Control List Zone Administrative StateAlarm BootP Class 3 Service Configured Zone SetsDefault Visibility Fabric Management Switch Input Power LED Inter-Switch LinkMaintenance Button Maintenance Mode Zoning Database Small Form-Factor PluggableSoft Zone Target Index Index-2 59097-01 a 59097-01 a Index-3 Index-4 59097-01 a 59097-01 a Index-5 Index-6 59097-01 a 59097-01 a Index-7 Index-8 59097-01 a 59097-01 a Index-9 Index-10 59097-01 a