A – Command Line Interface | 0 | |
|
| |
Set Log Command |
|
|
|
|
|
|
|
|
None
Monitor none of the component events.
Other
Monitors other miscellaneous events.
Port
Monitors all port events.
SNMP
Monitors all SNMP events.
Switch
Monitors switch management events.
Zoning
Monitors zoning conflict events.
display [filter]
Specifies the log events to automatically display on the screen according to the event severity levels given by [filter]. [filter] can be one of the following values:
Critical
Critical severity level events. The critical level describes events that are generally disruptive to the administration or operation of the fabric, but require no action.
Warn
Warning severity level events. The warning level describes events that are generally not disruptive to the administration or operation of the fabric, but are more important than the informative level events.
Info
Informative severity level events. The informative level describes routine events associated with a normal fabric.
None
Specifies no severity levels for display on the screen.
