Viewing and Comparing Version Snapshots | Sun Microsystems 5602

0		3 – Managing Fabrics
		3 – Managing Fabrics
	Tracking Fabric Firmware and Software Versions

The Summary tab page shows a brief description of the changes that have occurred between the older snapshot and the newer one. Use the Summary tab page quickly view what has changed.

3.3.2

Viewing and Comparing Version Snapshots

The Differences tab page shows a side-by-side comparison of two snapshots. The timestamp of each snapshot is displayed above the scroll area showing that snapshot. The background color of the older snapshot is darker than the background of the newer snapshot. The arrow icon between the snapshot selectors always points from the older snapshot to the newer one. If the two snapshots have the same timestamp, the arrow will not be displayed. The scroll bars are synchronized to view the same portion of each snapshot file simultaneously. Click and drag the separator bar between the two panes to resize each pane. At the top of the separator bar between the two panes, click the left/right arrows to close the corresponding pane. The left/right arrows move to one side.

3.3.3

Exporting Version Snapshots to a File

The Reports tab page enables you to select one of several reports to save to a text file. The are two types of reports. The Summary report type shows the same format displayed on the Summary tab page without the color highlighting. The Detail report type shows a detailed breakdown of the differences. Use the Export button to save the selected report to a text file.

Figure 3-9. Fabric Version Snapshot Analysis Dialog

59097-01 A

3-21

Image 67

Sun Microsystems 5602 manual Viewing and Comparing Version Snapshots, Exporting Version Snapshots to a File

Contents

SANbox 5602 Switch Management User’s Guide Document Revision History SANbox 5602 Switch Management User’s Guide Table of Contents 12.2 Section Managing Fabrics11.6 12.1 3.1 5.15.2 4.1 Devices Data Window Switch Data Window Section Managing Switches 14.1 2.42.5 2.6 Section Managing Ports Appendix a Command Line Interface 112 Backing up and Restoring Switch Configurations106 109 Glossary Index Tables Port Threshold Alarm Configuration Dialog 134 Related Materials Intended AudienceJdom License Technical Support Training AvailabilityContact Information Introduction Technical Support 59097-01 a Using SANsurfer Switch Manager Workstation Requirements Installing the Management ApplicationWorkstation Requirements For a Solaris platform SANsurfer Switch ManagerFor a Windows platform For a Linux platform SANsurfer Management Suite SMS Installation for WindowsFor a Mac OS X platform Chglax.bat SMS Installation for Linux Chmod +x sansurferswitchmgrlinux5.02.xx.bin SMS Installation for Solaris Change directories to the package location Install the new SANsurfer Switch Manager packageLocate and execute the file sbmoversms.sh ‰ For Linux or Solaris enter the SANsurfer command Starting SANsurfer Switch Manager Initial Startup Dialog SANsurfer Switch Manager Window Exiting SANsurfer Switch Manager View file upon exit future SANsurfer Switch Manager sessions Uninstalling SANsurfer Switch Manager Installdirectory/UninstallData/SANsurferUninstaller SMS Uninstall Changing the Encryption Key for the Default Fabric View File Standalone Uninstall Saving and Opening Fabric View Files Setting SANsurfer Switch Manager Preferences Preferences Dialog SANsurfer Switch Manager Viewing Software Version and Copyright Information Using Online Help Topology Display SANsurfer Switch Manager User InterfaceFaceplate Display Topology Display Menu Menu Bars Shortcut Keys Faceplate Display Menu Tool Bar Buttons Tool Bar Fabric Tree Fabric Tree Graphic Window Working Status IndicatorData Window and Tabs Switch and Link Status Using the Topology Display Selecting Switches and Links Working with Switches and LinksArranging Switches in the Display Topology Data Windows Opening the Faceplate and Topology Display Popup Menus Port Views and Status Using the Faceplate Display Selecting Ports Working with PortsOpening the Faceplate Popup Menu Faceplate Data Windows Radius Servers Managing Fabrics Add Radius Server Adding a Radius Server Managing Fabrics Remove Radius Server Removing a Radius Server Edit Radius Server Information Editing Radius Server Information Modify Authentication Order Radius Server Information Modifying Authentication Order Radius Server Information Connection Security Securing a FabricFabric security consists of the following User Account Security Security Consistency Checklist Device Security Edit Security Dialog Edit Security Dialog Creating a Security Set Create Security Group Dialog Create Security Group Dialog Creating a Security Group Create a Security Group Member Dialog Create Security Group Member Dialog Creating a Security Group Member Editing the Security Configuration on a Switch Viewing Properties of a Security Set, Group, or Member Using the Security Config Dialog Activating a Security Set Archiving a Security Configuration to a FileDeactivating a Security Set Fabric Services Configured Security Data WindowActive Security Data Window Tracking Fabric Firmware and Software Versions Enabling Snmp ConfigurationClick the In-band Management Enable button Enabling In-band Management Exporting Version Snapshots to a File Viewing and Comparing Version Snapshots Adding a Fabric Managing the Fabric Database Opening a Fabric View File Removing a Fabric Saving a Fabric View File Deleting Switches and LinksRediscovering a Fabric Adding a New Switch to a Fabric Replacing a Failed Switch Fabric Status Displaying Fabric Information Switch Icon Description Topology Display Switch and Status Icons 11. Events Browser Displaying the Event Browser Description Icon Severity Levels 12. Filter Events Dialog Filtering the Event Browser Saving the Event Browser to a File Sorting the Event Browser Devices Data Window Entries Devices Data Window 13. Active Zone Set Data Window Active Zone Set Data Window Displaying Detailed Device Information SANsurfer Switch Manager enables you to do the followingLink Data Window Working with Device Information and Nicknames Managing Device Port Nicknames Exporting Device Information to a FileCreating a Nickname Deleting a Nickname Editing a NicknameExporting Nicknames to a File Zoning a Fabric Importing a Nicknames FileZoning Concepts Soft Zones Zones Aliases Access Control List Hard ZonesZone Sets Zoning Database Managing the Zoning Database Using the Zoning WizardManaging the zoning database consists of the following 15. Edit Zoning Dialog Editing the Zoning Database Managing Fabrics Zoning a Fabric Edit Zoning Dialog Tool Bar Buttons and Icons Interop Auto Save Configuring the Zoning Database Restoring the Zoning Database from a File Default VisibilityDiscard Inactive Saving the Zoning Database to a File Removing All Zoning Definitions Restoring the Default Zoning Database Creating a Zone Set Managing Zone Sets Copying a Zone to a Zone Set Activating and Deactivating a Zone Set Removing a Zone Set Removing a Zone from a Zone Set or from All Zone Sets Managing zones involves the following Managing Zones Creating a Zone in a Zone Set Adding Zone Members Removing a Zone from All Zone Sets Renaming a Zone or a Zone SetRemoving a Zone Member Removing a Zone from a Zone Set Managing Aliases Changing Zone TypesCreating an Alias Removing an Alias from All Zones Adding a Member to an Alias Merging Fabrics and Zoning Zone Merge Failure RecoveryZone Merge Failure Managing User Accounts Managing Switches Factory User Accounts Creating User Accounts User Account Administration Dialog Add Account Removing a User Account User Account Administration Dialog Remove Account User Account Administration Dialog Change Password Changing a User Account Password Modifying a User Account User Account Administration Dialog Modify Account 5shows the faceplate display for the SANbox 5602 switch Displaying Switch Information Switch Data Window Entries Switch Data Window Ratov Switch Data Window Entries Displaying Detailed Device Information on page 3-35for Port Information Data Window Port Statistics Data Window Configured Zonesets Data Window Configured Zonesets Data Window Port Threshold Alarm Configuration Dialog Configuring Port Threshold Alarms Sample Window Paging a SwitchEvent Count Resetting a Switch Setting the Date/Time and Enabling NTP Client Type Description Switch Resets Using the Configuration Wizard Configuring a Switch Symbolic Name Switch Properties Switch Administrative States Switch Administrative States Fabric Device Management Interface Domain ID and Domain ID Lock In-band Management Broadcast Support Interop Mode for Zoning Advanced Switch Properties Timeout Values Timeout ValuesLegacy Port Address Format 11. System Services Dialog System Services Dialog Security Consistency Checklist Dialog 12. Network Properties Dialog Network Properties IP Configuration Parameters IP Configuration NTP Client Remote Logging 13. Snmp Properties Dialog Snmp Properties Snmp Configuration Parameters Snmp Configuration Snmp Trap Configuration Parameters Snmp Trap Configuration 14. Switch Stacks Managing Switch Stacks Managing Switches Managing Switch Stacks Select Source Dialog SyslogInformation Archiving a Switch 16. Restore Dialogs Full and Selective Restoring a Switch Managing Switches Restoring a Switch Factory Default Configuration Settings Restoring the Factory Default Configuration Factory Default Configuration Settings Downloading a Support File Upgrading the Switch Using License Keys 17. Features License Key Dialog Installing Firmware Managing Switches 19. Hardware Status LEDs Displaying Hardware Status Displaying Port Information Managing Ports Displaying Port Types Monitoring Port StatusPort Types Port Speeds Displaying Port Operational StatesDisplaying Port Speeds Port Operational States Port Transceiver Media View Displaying Transceiver Media Status Port Statistics Data Window Entries LIP ALPD,ALPS Port Statistics Data Window Entries Port Information Data Window Entries Port Information Data Window Entries Port Properties Dialog Configuring Ports Port Administrative States Changing Port Administrative States Changing Port Speeds Stream Guard Changing Port Types Using the Extended Credits Wizard Changing Port Symbolic NameDevice Scan Designate Donor Ports Resetting a Port Port Loopback Test Dialog Testing Ports Managing Ports Fabric View Graphs Graphing Port Performance Starting SANsurfer Performance Viewer This section describes how to do the followingExiting SANsurfer Performance Viewer Save Default Performance View File Dialog Saving and Opening Performance View Files Changing the Default Performance View File Encryption Key Setting the Polling Frequency Setting SANsurfer Performance Viewer Preferences Displaying Graphs for a Stack Displaying Graphs for a Switch Customizing Graphs Arranging Graphs in the Display Managing Ports Saving Graph Statistics to a File Setting Global Graph TypeRescaling a Selected Graph Printing Graphs Logging On to a Switch Command Line Interface User Accounts Working with Switch Configurations Modifying a Configuration Backing up and Restoring Switch Configurations Ftp ipaddress Table A-1. Command-Line Completion CommandsCommand syntax is as follows Command keyword keyword value Admin Session Commands Table A-2. Commands Listed by Authority Level Keywords Admin CommandAuthority Syntax Syntax alias Alias Command Remove alias memberlist Members aliasRename aliasold aliasnew CIM Command Table A-3. CIM Listener Configuration Parameters CIMListener Command Enter Following is an example of the CIMListener Create command Table A-4. CIM Subscription Configuration Parameters CIMSubscription Command # cimsubscription create subscription1 Edit configname Config CommandSyntax config Keywords activate configname Save configname RestoreManager Archive function are not compatible with the Config Restore command #ftp symbolicname or ipaddress user images Support Create CommandCreate Certificate Command Line Interface Create Command Following is an example of the Create Certificate command Syntax date Date CommandKeywords MMDDhhmmCCYY Syntax feature Feature CommandAuthority Admin Command Line Interface Firmware Install Command Syntax group Group Command Table A-5. ISL Group Member Attributes Keywords add group Table A-6. Port Group Member Attributes Create group type Copy groupsource groupdestination Table A-8. Group Member Attributes Edit group member Securitysets group Members groupRemove group memberlist Rename groupold groupnew ISL Following is an example of the Group Edit command Following is an example of the Group Members command Following is an example of the Group List command Syntax Hardreset Command Authority None Help CommandKeywords command Syntax help command keyword Authority None Syntax history History Command Hotreset Hotreset Command Image Command Ftp Ftp switchname Wait for the unpack to complete SANbox Manager admin # image install Lip portnumber Lip CommandFollowing is an example of the Lip command Reinitializes the specified loop port Syntax passwd accountname Keywords accountname Passwd Command Syntax ping ipaddress Keywords ipaddress Ping Command Displays current system process information Ps CommandFollowing is an example of the Ps command Syntax Examples Closes the Telnet session Quit CommandSyntax quit, exit, or logout Config configname Reset Command Snmp ServicesSwitch Security Values Table A-9. Switch Configuration Defaults Parameter Gbps/2-Gbps Port Gbps Port Defaults Table A-10. Port Configuration Defaults Table A-12. Zoning Configuration Defaults Table A-11. Port Threshold Alarm Configuration Defaults Table A-14. Radius Configuration Defaults Table A-13. Snmp Configuration Defaults Table A-15. Services Configuration Defaults Table A-17. Security Configuration Defaults Table A-16. System Configuration Defaults Keywords active Security Command MD5 History Following is an example of the Security Limits command Following is an example of the Security History command Following is an example of the Security List command Securityset Command Rename securitysetold securitysetnew Delete securitysetGroups securityset Remove securityset group Syntax set Set Command Port option Setup optionSwitch state Pagebreak state Port portnumber Set Config CommandSet config Table A-18. Set Config Port Parameters Command Line Interface Set Config Command Table A-18. Set Config Port Parameters Table A-19. Security Configuration Parameters Table A-20. Set Config Switch Parameters Table A-20. Set Config Switch Parameters Threshold Table A-21. Set Config Threshold Parameters Table A-22. Set Config Zoning Parameters Arbff Enter key to do so Configuring Port Number AdminState Following is an example of the Set Config Security command # set config switch Following is an example of the Set Config Switch command Following is an example of the Set Config Threshold command Following is an example of the Set Config Zoning command Component filterlist Set Log CommandSet log Archive Display filter Snmp Stop Level filterPort portlist Start Alarms are always logged and always displayed on the screen Set Port Command State state Configuration fields Set Setup CommandSet setup Radius Services Snmp System Command Line Interface Set Setup Command Table A-24. Switch Services Settings Table A-24. Switch Services Settings Table A-25. Snmp Configuration Settings Table A-26. System Configuration Settings Table A-26. System Configuration Settings Current value Following is an example of the Set Setup Services command Following is an example of the Set Setup Snmp command Setup system Following is an example of the Set Setup System command Keywords about Show Command Fdmi portwwn Alarm optionCimlistener listenername Cimsubscription subscriptionname Pagebreak Log optionLsdb Ns option Tbuf Table A-27. Show Port Parameters LIPF8ALPS Steering domainid Post log „ Zoning History, Limits, List Table A-28. Switch Operational ParametersWhoami Zoneset Active, List Users Displays the current time zone settingTopology Displays all connected devices Following is an example of the Show Fabric command Following is an example of the Show Domains commandFollowing is an example of the Show Fdmi command Following is an example of the Show NS local domain command Following is an example of the Show Fdmi WWN command Following is an example of the Show NS portID command Following is an example of the Show NS domainID commandFollowing is an example of the Show Interface command PL-XPL-VC-SG3-22 Following is an example of the Show Port command Following is an example of the Show Topology command Following is an example of the Show Switch command 104 59097-01 a Following is an example of the Show Version command Show config Show Config Command Following is an example of the Show Config Switch command Following is an example of the Show Config Zoning command Following is an example of the Show Config Threshold command Keywords numberofevents Show Log CommandNone Show log Options SettingsZoning Monitors zoning conflict events Level Following is an example of the Show Log Options command Following is an example of the Show Log Level commandFollowing is an example of the Show Log command Stop the display Show Perf CommandShow perf Portnumber Following is an example of the Show Perf Byte command Following is an example of the Show Perf command Show setup Show Setup CommandMfg Following is an example of the Show Setup Radius command Following is an example of the Show Setup Snmp command Following is an example of the Show Setup System command Power from the switch Shutdown CommandShutdown Status Test CommandTest Port portnumber testtype Admin start Test port x online Examples The following is an example of the Uptime command Uptime CommandAuthority None Syntax uptime Add User CommandUser Accounts Following is an example of the User Edit command Following is an example of the User Add command Following is an example of the User List command Following is an example of the User Delete command Following is an example of the Whoami command Whoami CommandWhoami Syntax zone Zone Command Type zone zonetype Members zoneRemove zone memberlist Rename zoneold zonenew Following is an example of the Zone Members command Following is an example of the Zone Zonesets command Syntax zoneset Zoneset Command Rename zonesetold zonesetnew Following is an example of the Zoneset List commandFollowing is an example of the Zoneset Zones command Remove zoneset zonelist Opens a Zoning Edit session Zoning Command Limit Description Table A-29. Zoning Database Limits E1JBOD1 E2JBOD2 Following is an example of the Zoning Limits command Following is an example of the Zoning List command BootP Access Control List ZoneAdministrative State Alarm Fabric Management Switch Class 3 ServiceConfigured Zone Sets Default Visibility Maintenance Mode Input Power LEDInter-Switch Link Maintenance Button Target Zoning DatabaseSmall Form-Factor Pluggable Soft Zone Index Index-2 59097-01 a 59097-01 a Index-3 Index-4 59097-01 a 59097-01 a Index-5 Index-6 59097-01 a 59097-01 a Index-7 Index-8 59097-01 a 59097-01 a Index-9 Index-10 59097-01 a