Sun Microsystems 5602 manual Switch Data Window Entries

4 – Managing Switches		0
Displaying Switch Information
	Table 4-2. Switch Data Window Entries (Continued)
	Entry	Description
	Zoning Default Visibility	Zoning visibility status. Permits (All) or prevents (None)
		communication between attached devices in the absence
		of an active zone set.
	Security Auto Save	N/A - does not apply to this switch
	Security Fabric Binding	N/A - does not apply to this switch
	Enable
	Temperature	Internal switch temperature °C
	Fan 1 Status	The status of Fan 1
	Fan 2 Status	The status of Fan 2
	Fan 3 Status	N/A - does not apply to this switch
	Power Supply 1 Status	Power supply 1 status
	Power Supply 2 Status	Power supply 2 status
	Beacon Status	Beacon status. Switch LEDs are blinking (On) or not (off).
	Broadcast Support	Broadcast support status. Broadcast support is enabled or
		disabled (default).
	In-band Enabled	In-band management status. Permits (True) or prevents
		(False) a switch from being managed over an ISL.
	Temperature Failure Port	Non-configurable (always enabled for this switch). All
	Shutdown	ports are downed when the switch temperature exceeds
		the Failure Temperature.
	Warning Temperature	Non-configurable temperature threshold (65° Celsius)
		above which a warning condition alarm is generated.
	Failure Temperature	Non-configurable temperature threshold (70° Celsius)
		above which a failure condition alarm is generated.
	NTP Client Enabled	Enabled or disabled. Allows for switches to synchronize
		their time a centralized server.
	NTP Server Address	The IP address of the centralized NTP server. Ethernet
		connection to NTP server is required.
	FDMI HBA Entry Limit	Maximum number of HBAs that can be registered with a
		switch.

4-10 59097-01 A