Checking the Focus
You can magnify the area of a recorded image that was inside the AF Frame to check the focus.
Press the lbutton to switch to the focus check display (p. 46).
zFor images with detected faces, you can also switch to the focus check display by
pressing the 0 button.
XA white frame will appear where the AF frame was when the focus was set.
XA gray frame will appear on a face detected during playback.
XThe area within the orange frame appears magnified.
Switch frames.
zMove the zoom lever toward k once.
X The screen shown on the left will appear.
zPress the 0 button to switch between frames on detected faces. Press the m button to move to other frames.
Change the magnification level or location.
zUse the zoom lever to change the display size, and the opqr buttons to change the display position while checking the focus.
zPress the n button to reset the display to Step 1.
The focus check display is not available for movies.
