Sun Microsystems 5602 manual Command Line Interface, Logging On to a Switch

Appendix A

Command Line Interface

„Logging On to a Switch

„User Accounts

„Working with Switch Configurations

„Commands

A.1

Logging On to a Switch

To log on to a switch using Telnet, open a command line window on the workstation and enter the Telnet command followed by the switch IP address:

# telnet ip_address

A Telnet window opens prompting you for a login. Enter an account name and password.

To log on to a switch through the serial port, configure the workstation port with the following settings:

„9600 baud

„8-bit character

„1 stop bit

„No parity

Enter an account name and password when prompted.

59097-01 A A-1