Troubleshooting:Dell P2211H/P2311H Flat Panel Monitor User's Guide

To run the built-in diagnostics:

1.Ensure that the screen is clean (no dust particles on the surface of the screen).

2.Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self-test mode.

3.Press and hold the Button 1 and Button 4 on the front panel simultaneously for 2 seconds. A gray screen appears.

4.Carefully inspect the screen for abnormalities.

5.Press the Button 4 on the front panel again. The color of the screen changes to red.

6.Inspect the display for any abnormalities.

7.Repeat steps 5 and 6 to inspect the display in green, blue, black, white screens.

The test is complete when the white screen appears. To exit, press the Button 4 again.

If you do not detect any screen abnormalities upon using the built-in diagnostic tool, the monitor is functioning properly. Check the video card and computer.

Common Problems

The following table contains general information about common monitor problems you might encounter and the possible solutions.

Common Symptoms

What You Experience

Possible Solutions

No Video/Power LED off

No picture

Ensure that the video cable connecting the monitor and the computer is properly

 

 

connected and secure.

 

 

Verify that the power outlet is functioning properly using any other electrical equipment.

 

 

Ensure that the power button is depressed fully.

 

 

Ensure that the correct input source is selected via the Input Source Select button.

No Video/Power LED on

No picture or no brightness

Increase brightness & contrast controls via OSD.

 

 

Perform monitor self-test feature check.

 

 

Check for bent or broken pins in the video cable connector.

 

 

Run the built-in diagnostics.

 

 

Ensure that the correct input source is selected via the Input Source Select button.

Poor Focus

Picture is fuzzy, blurry, or

 

ghosting

Perform Auto Adjust via OSD.

Adjust the Phase and Pixel Clock controls via OSD. Eliminate video extension cables.

Reset the monitor to Factory Settings.

Change the video resolution to the correct aspect ratio (16:9).

Shaky/Jittery Video

Wavy picture or fine

Perform Auto Adjust via OSD.

 

movement

Adjust the Phase and Pixel Clock controls via OSD.

 

 

Reset the monitor to Factory Settings.

 

 

Check environmental factors.

 

 

Relocate the monitor and test in another room.

Missing Pixels

LCD screen has spots

Cycle power on-off.

 

 

Pixel that is permanently off is a natural defect that can occur in LCD technology.

 

 

For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at:

 

 

support.dell.com.

Stuck-on Pixels

LCD screen has bright spots

Cycle power on-off.

 

 

Pixel that is permanently off is a natural defect that can occur in LCD technology.

 

 

For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at:

 

 

support.dell.com.

Brightness Problems

Picture too dim or too bright

Reset the monitor to Factory Settings.

 

 

Auto Adjust via OSD.

 

 

Adjust brightness & contrast controls via OSD.

file:///S/SSA_Proposal/P2211_P2311/solve.htm[7/13/2011 12:17:59 PM]

Page 34
Image 34
Dell P2311H, P2211H appendix Common Problems, Common Symptoms What You Experience Possible Solutions

P2311H, P2211H specifications

Dell has long been known for its commitment to quality and innovation in the realm of computer hardware, and its series of professional monitors exemplifies this dedication. Among these, the Dell P2411H, P2211H, and P2311H stand out as versatile displays designed to meet the demands of business and multimedia environments. Each of these models incorporates a range of features and technologies that enhance the user experience.

Starting with the Dell P2411H, this 24-inch monitor showcases a vibrant 1920 x 1080 Full HD resolution. One of its standout features is the use of an IPS (In-Plane Switching) panel. This technology ensures that users benefit from wide viewing angles, rich colors, and outstanding color accuracy. With a 1000:1 contrast ratio and a brightness level of up to 250 cd/m², the P2411H produces crisp visuals ideal for tasks ranging from document editing to graphic design. Users will also appreciate the monitor's ergonomic design, which includes height, tilt, pivot, and swivel adjustments for optimal viewing comfort.

Next in line is the Dell P2211H, which features a slightly smaller 22-inch display with the same impressive 1920 x 1080 resolution. Much like the P2411H, this monitor also employs IPS technology, ensuring an exceptional viewing experience. The P2211H has a competitive 1000:1 contrast ratio and up to 250 cd/m² brightness, making it a reliable choice for various office applications. Its ultra-thin bezels enhance the aesthetic appeal and make it possible to set up multi-monitor configurations seamlessly. This model also emphasizes energy efficiency with its Energy Star rating.

Completing the trio is the Dell P2311H, featuring a 23-inch screen that offers similar specifications to its counterparts. With Full HD resolution and IPS panel technology, the P2311H excels in delivering vivid colors and consistent performance across wide viewing angles. The monitor provides flexible connectivity options, including DisplayPort, DVI, and VGA, catering to a variety of setups and devices. The stand is fully adjustable, ensuring that users can customize their workstations for maximum productivity.

In conclusion, the Dell P2411H, P2211H, and P2311H monitors are exemplary of Dell's commitment to delivering high-quality visual solutions. Each model brings together advanced technologies, user-friendly features, and robust design, making them suitable for both professional and personal use. Whether for engaging presentations, gaming, or routine office tasks, these displays provide optimal performance and reliability.