A – Command Line Interface | 0 | |||
|
| |||
Set Config Command |
|
| ||
|
|
|
|
|
|
|
|
|
|
| Table | |||
|
|
|
| |
| Parameter | Description |
| |
|
|
|
| |
| IOStreamGuard | I/O Stream Guard. Enables or disables the suppression of |
| |
|
|
| RSCN messages. IOStreamGuard can have the following |
|
|
|
| values: |
|
|
|
| Enable – Suppresses the reception of RSCN messages |
|
|
|
| from other ports for which IOStreamGuard is enabled. |
|
|
|
| Disable – Allows free transmission and reception of |
|
|
|
| RSCN messages. |
|
|
|
| Auto – Suppresses the reception of RSCN messages |
|
|
|
| when the port is connected to an initiator device with a |
|
|
|
| QLogic HBA. For older QLogic HBAs, such as the |
|
|
|
| QLA2200, the DeviceScanEnabled parameter must also |
|
|
|
| be enabled. The default is Auto. |
|
| PDISCPingEnable | Enables (True) or disables (False) the transmission of ping |
| |
| messages from the switch to all devices on a loop port. The |
| ||
| only) | default is True. |
| |
|
|
|
|
|
security
Initiates an editing session in which to change the security settings. The system displays each parameter one line at a time and prompts you for a value. For each parameter, enter a new value or press the Enter key to accept the current value shown in brackets. Enter “q” or "Q" to end the editing session. Table
Table A-19. Security Configuration Parameters
Parameter | Description |
|
|
AutoSave | Enables (True) or disables (False) the saving of changes |
| to active security set in the switch’s permanent memory. |
| The default is True. |
FabricBindingEnabled | Enables (True) or disables (False) the configuration and |
| enforcement of fabric binding on all switches the fabric. |
| Fabric binding associates switch worldwide names with a |
| domain ID in the creation of ISL groups. |
|
|
switch
Initiates an editing session in which to change switch configuration settings. The system displays each parameter one line at a time and prompts you for a value. For each parameter, enter a new value or press the Enter key to accept the current value shown in brackets. Table