Sun Microsystems 5602 manual Table A-20. Set Config Switch Parameters

0			A – Command Line Interface
			Set Config Command
	Table A-20. Set Config Switch Parameters
	Parameter	Description
	AdminState	Switch administrative state: online, offline, or
		diagnostics. The default is Online.
	BroadcastEnabled	Broadcast. Enables (True) or disables (False)
		forwarding of broadcast frames. The default is True.
	InbandEnabled	Inband management. Enables (True) or disables
		(False) the ability to manage the switch over an ISL.
		The default is True.
	FDMIEnabled	Fabric Device Monitoring Interface. Enables (True) or
		disables (False) the monitoring of target and initiator
		device information. The default is True.
	FDMIEntries	The number of device entries to maintain in the FDMI
		database. Enter a number from 0–1000. The default
		is 1000.
	DefaultDomainID	Default domain ID. The default is 1.
	DomainIDLock	Prevents (True) or allows (False) dynamic
		reassignment of the domain ID. The default is False.
	SymbolicName	Descriptive name for the switch. The name can be up
		to 32 characters excluding #, semicolon (;), and
		comma (,). The default is SANbox Manager.
	R_A_TOV	Resource Allocation Timeout Value. The number of
		milliseconds the switch waits to allow two ports to
		allocate enough resources to establish a link. The
		default is 10000.
	E_D_TOV	Error Detect Timeout Value. The number of
		milliseconds a port is to wait for errors to clear. The
		default is 2000.
	PrincipalPriority	The priority used in the FC-SW-2 principal switch
		selection algorithm. 1 is high, 255 is low. The default
		is 254.
	ConfigDescription	Switch configuration description. The configuration
		description can be up to 32 characters excluding #,
		semicolon (;), and comma (,). The default is
		Config Default.

59097-01 A A-65