Sun Microsystems 5602 manual CIMListener Command, Table A-3. CIM Listener Configuration Parameters

A – Command Line Interface	0
CIMListener Command

CIMListener Command

Configures CIM indication service listeners and adds subscriptions to listeners. Refer to the ”CIMSubscription Command” on page A-14for information about configuring subscriptions.

Authority Admin session and a CIM Edit session. Refer to the ”CIM Command” on page A-11for information about opening a CIM edit session.

Syntax cimlistener

add [listener_name] [subscription_list] create [listener_name]

delete [listener_name] edit [listener_name]

Keywords add [listener_name] [subscription_list]

Adds the set of subscriptions given by [subscription_list] to the listener given by [listener_name]. Use a <space> to delimit subscription names in [subscription_list].

create [listener_name]

Prompts you in a line-by-line fashion to create a CIM listener with the name given by [listener_name]. [listener_name] can have up to 32 characters: 0-9, A-Z, a-z, _, $, ^, and -. The CIM listener configuration parameters are described in Table A-3.

Table A-3. CIM Listener Configuration Parameters

Parameter	Description
Name	Listener name
Type	Listener type:
	„ Permanent – Send indications to the CIM client whether a
	connection can be established or not. This is the default.
	„ Transient – Sends indications to the CIM client, but ceases
	if a connection cannot be established after 60 minutes.
URL	IP address of the CIM client and the port number to which to send
	indications. The default is 10.0.0.1:5000.

delete [listener_name]

Deletes the listener given by [listener_name] from the CIM database.

edit [listener_name]

Opens an editing session in which you can modify the CIM listener given by [listener_name]. Refer to Table A-3for a description of the CIM listener configuration parameters.

A-12 59097-01 A