Sun Microsystems 5602 manual Configuring Ports, Port Properties Dialog

5 – Managing Ports	0
Configuring Ports

5.2

Configuring Ports

The port settings or characteristics for 1-Gbps/2-Gbps/4-Gbps and 10-Gbps ports are configured using the Port Properties dialogs shown in Figure 5-2. To open the corresponding type of Port Properties dialog, select one or more ports, open the Port menu and select Port Properties or Port Properties 10G.

Figure 5-2. Port Properties Dialog

The 1-Gbps/2-Gbps/4-Gbps and 10-Gbps Port Properties dialogs displays the switch name and the selected ports. Use the Port Properties dialogs to change the following parameters:

„Port state

„Port speed (1-Gbps/2-Gbps/4-Gbps only)

„Port type

„I/O Stream Guard (RSCN Suppression)

„Device scan

5-10 59097-01 A