Sun Microsystems 5602 manual Table A-6. Port Group Member Attributes

0				A – Command Line Interface
				Group Command
		Table A-6. Port Group Member Attributes
	Attribute		Description
	Member	Port worldwide name for the N_Port device that would attach to the
		switch. A member cannot belong to more than one group.
	Authentication	Enables (CHAP) or disables (None) authentication using the
		Challenge Handshake Authentication Protocol (CHAP). The default
		is None.
	Primary Hash	The preferred hash function to use to decipher the encrypted
		Primary Secret sent by the Port group member. The hash functions
		are MD5 or SHA-1. If the Port group member does not support the
		Primary Hash, the switch will use the Secondary Hash.
	Primary Secret	Hexadecimal string that is encrypted by the Primary Hash for
		authentication with the Port group member. The string has the
		following lengths depending on the Primary Hash function:
		„	MD5 hash: 16-byte
		„	SHA-1 hash: 20-byte
	Secondary Hash	Hash function to use to decipher the encrypted Secondary Secret
		sent by the Port group member. Hash values are MD5 or SHA-1.
		The Secondary Hash is used when the Primary Hash is not
		available on the Port group member. The Primary Hash and the
		Secondary Hash cannot be the same.
	Secondary	Hex string that is encrypted by the Secondary Hash and sent for
	Secret	authentication. The string has the following lengths depending on
		the Secondary Hash function:
		„	MD5 hash: 16-byte
		„	SHA-1 hash: 20-byte

59097-01 A A-27