0

A – Command Line Interface

 

 

Feature Command

 

 

 

 

Feature Command

Adds license key features to the switch and displays the license key feature log. To order a license key contact your switch distributor or your authorized reseller. Upgrading a switch is not disruptive, nor does it require a switch reset.

Authority Admin session for Add keyword only

Syntax feature

add [license_key] log

Keywords add [license_key]

Adds the feature that corresponds to the value given by [license_key]. [license_key] is case insensitive.

log

Displays a list of installed license key features.

NotesFirmware Install Command

Downloads firmware from a remote host to the switch, installs the firmware, then resets the switch (without a power-on self test) to activate the firmware. If possible, a non-disruptive activation is performed. The command prompts you for the following:

„IP address of the remote host

„An account name and password on the remote host

„Pathname for the firmware image file

Authority Admin

Syntax firmware install

Examples The following is an example of the Firmware Install command:

SANbox Manager (admin) #> firmware install

Warning: Installing new firmware requires a switch reset.

A stable farbic is required to successfully activate the firmware on a switch without disrupting traffic. Therefore, before continuing with this action, ensure there are no administrative changes in progress anywhere in the fabric.

Continuing with this action will terminate all management sessions, including any Telnet sessions. When the firmware activation is complete, you may log in to the switch again.

Do you want to continue? [y/n]: y

Press 'q' and the ENTER

key to abort this command.

User Account

: johndoe

 

IP Address

: 10.20.33.130

59097-01 A

A-23

Page 197
Image 197
Sun Microsystems 5602 manual Feature Command, Syntax feature, Authority Admin