A – Command Line Interface | 0 | ||||
|
|
| |||
Show Command |
|
|
| ||
|
|
|
|
|
|
|
|
| Table | ||
|
|
| |||
|
|
|
| ||
| Entry |
| Description | ||
|
|
|
| ||
| TotalTxFrames |
| Total number of frames issued by this port. | ||
| TotalTxWords |
| Total number of words issued by this port. | ||
| TxLinkResets |
| Number of Link Resets issued by this port. | ||
| TxOfflineSeq |
| Total number of Offline Sequences issued by this port. | ||
|
|
|
|
|
|
post log
Displays the Power On Self Test (POST) log which contains results from the most recently failed POST.
setup [option]
Displays setup attributes for the system, SNMP, and the switch manufacturer. Refer to the ”Show Setup Command” on page
steering [domain_id]
Displays the routes that data takes to the switch given by [domain_id]. If you omit [domain_id], the system displays routes for all switches in the fabric.
support
Executes a series of commands that display a complete description of the switch, its configuration, and operation. The display can be captured from the screen and used for diagnosing problems. This keyword is intended for use at the request of your authorized maintenance provider. The commands that are executed include the following:
Alias List
Config List
Date
Group List
History
Ps
Security (List, Limits, History)
Securityset (Active, List)
Show (About, Alarm, Backtrace, Chassis, Config Port, Config Security, Config Switch, Config Threshold, Dev, Dev Settings, Domains, Donor, Fabric, Log, Log Archive, Log Settings, Lsdb, Mem, Ns, Perf, Port, Setup Mfg, Setup Snmp, Setup System, Steering, Switch, Topology, Users)
Uptime
User Accounts
