Sun Microsystems 5602 manual 2.4, 2.5, 2.6, 14.1

0		SANbox 5602 Switch Management
			User’s Guide
4.2.3	Port Statistics Data Window	4-12
4.2.4	Port Information Data Window	4-12
4.2.5	Configured Zonesets Data Window	4-13
4.3	Configuring Port Threshold Alarms	4-14
4.4	Paging a Switch	4-15
4.5	Setting the Date/Time and Enabling NTP Client	4-16
4.6	Resetting a Switch	4-16
4.7	Configuring a Switch	4-18
4.7.1	Using the Configuration Wizard	4-18
4.7.2	Switch Properties	4-19
4.7.2.1	Symbolic Name	4-19
4.7.2.2	Switch Administrative States	4-20
4.7.2.3	Domain ID and Domain ID Lock	4-21
4.7.2.4	Fabric Device Management Interface	4-21
4.7.2.5	Broadcast Support	4-22
4.7.2.6	In-band Management	4-22
4.7.3	Advanced Switch Properties	4-23
4.7.3.1	Interop Mode for Zoning	4-23
4.7.3.2	Legacy Port Address Format	4-24
4.7.3.3	Timeout Values	4-24
4.7.4	System Services Dialog	4-25
4.7.5	Security Consistency Checklist Dialog	4-26
4.7.6	Network Properties	4-27
4.7.6.1	IP Configuration	4-28
4.7.6.2	Remote Logging	4-29
4.7.6.3	NTP Client	4-29
4.7.7	SNMP Properties	4-30
4.7.7.1	SNMP Configuration	4-31
4.7.7.2	SNMP Trap Configuration	4-32
4.8	Managing Switch Stacks	4-33
4.8.1	Syslog	4-35
4.8.2	Select Source Dialog	4-35
4.9	Archiving a Switch	4-36
4.10	Restoring a Switch	4-37
4.11	Restoring the Factory Default Configuration	4-39
4.12	Downloading a Support File	4-41
4.13	Upgrading the Switch Using License Keys	4-41
4.14	Installing Firmware	4-42
4.14.1	Displaying Hardware Status	4-44

59097-01 A Page vii