20V MAX* trimmer/edger
INSTRUCTION MANUAL
Catalog Number
LST220
KEY INFORMATION YOU SHOULD KNOW:
•The guard must be installed before trimming or edging - if not, the motor will overheat.
•When replacing the line, use only .065 inch diameter ROUND line (B+D Model
•Do not bump the feed head against the ground - it will disrupt the automatic feed mechanism.
Thank you for choosing BLACK+DECKER!
Please read before returning this product for any reason.
If you have a question or experience a problem with your BLACK+DECKER purchase, go to http://www.blackanddecker.com/instantanswers If you can’t find the answer or do not have access to the Internet, call
Save this manual for future reference.
VEA EL ESPANOL EN LA CONTRAPORTADA. INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
*Maximum initial battery pack voltage (measured without a workload) is 20 volts. Measured under a workload, nominal voltage is 18.
To register your new product, call
1