20V MAX* lithium TRIMMER / EDGER
INSTRUCTION MANUAL
Model Number LST220
Thank you for choosing Black & Decker! Go to www.BlackandDecker.com/NewOwner to register your new product.
Please read before returning this product for any reason:
If you have a question or experience a problem with your
Black & Decker purchase, go to
www.blackanddecker.com/instantanswers
for instant answers 24 hours a day.
If you can’t find the answer or do not have access to the internet,
call
to speak with an agent.
Please have the catalog number available when you call.
Save this manual for future reference.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
POUR LE FRANÇAIS, VOIR LA COUVERTURE ARRIÈre.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
Model # LST220
*Maximum initial battery pack voltage (measured without a workload) is 20 volts. Measured under a workload, nominal voltage is 18.
KEY INFORMATION YOU SHOULD KNOW:
•The guard must be installed before trimming or edging - if not, the motor will overheat (page 8).
•When replacing the line, use only .065 inch diameter ROUND line (B&D Model
•Do not bump the feed head against the ground - it will disrupt the feed mechanism.
1