Black & Decker LST220R 14 q o, Rewinding Spool From Bulk Line, “Replacing The Spool”

Models: LST220R LST220

1 44
Download 44 pages 31.47 Kb
Page 11
Image 11
14

• Push the cap onto the housing until it snaps securely into place.

CAUTION: To avoid tool damage, if the cutting line protrudes beyond the trimming blade, cut it off so that it just reaches the blade.

14

q REWINDING SPOOL FROM BULK LINE“REPLACING THE SPOOL”.in “REPLACING THE SPOOL”.o

Insert the 3/4 inch (19mm) end of the bulk line into the hole (t) in the spool adjacent to the slot as shown in figure 16.

16

u

t

 

 

REWINDING SPOOL FROM BULK LINE

(use only .065 in. ROUND diameter line) (figures 15, 16, 17) Bulk line is also available for purchase from your local retailer. NOTE: Hand wound spools from bulk line are likely to become tangled more frequently than BLACK+DECKER factory wound spools. For best results, factory wound spools are recommended. To install bulk line, follow the steps below:

Remove battery from tool.

Remove the empty spool from the tool as described in

REPLACING THE SPOOL”.

Remove any remaining cutting line from the spool.

Make a fold at the end of the cutting line at about 3/4 inch (19mm)(r). Feed the cutting line into one of the line anchoring slots (s) as shown in figure 15.

• Wind the cutting line onto the spool in

17

 

 

 

the direction of the arrow on the spool.

 

 

 

Make sure to wind the line on neatly and

 

 

 

 

in layers. Do not crisscross (figure 17).

 

 

 

 

• When the wound cutting line reaches

 

 

 

 

the recesses (u), cut the line. (figure 16).

 

 

 

 

 

 

 

 

• Fit the spool onto the tool as described

 

 

 

 

in “REPLACING THE SPOOL”.

 

 

 

 

 

 

 

 

The RBRC™ Seal

 

 

 

 

15

r

The RBRC™ (Rechargeable Battery

Recycling Corporation) Seal on the LI-ION

battery (or battery pack) indicates that the

costs to recycle the battery (or battery pack) at the end of its useful

life have already been paid by BLACK+DECKER.

s

RBRC™ in cooperation with BLACK+DECKER and other

battery users, has established programs in the United

States to facilitate the collection of spent LI-ION batteries.

Help protect our environment and conserve natural resources by

returning the spent LI-ION battery to an authorized BLACK+DECKER

service center or to your local retailer for recycling. You may also

contact your local recycling center for information on where to

11

Page 11
Image 11
Black & Decker LST220R 14 q o, Rewinding Spool From Bulk Line, “Replacing The Spool”, in “REPLACING THE SPOOL”