Toshiba 32WL68T Selecting the video input source to view, Using the auto format, Side panel

Using the TV’s features

Using the auto format

When the TV receives a true HDMI signal picture and the auto format is On, it will automatically be displayed in HDMI signal format, irrespective of the TV’s previous setting.

1 Press M, then press Y or y to display the FUNCTION menu.

	FUNCTION
Teletext		Auto
Teletext SW		1
Auto format		On
Blue Screen		On
Side panel		1
MENU Back	EXIT Watch TV

2 Press < or > to select Auto format, then press Y or y to select On or Off.

Activating blue screen

With the blue screen function On, the screen will automatically turn blue and the sound will be muted when no signal is being received.

1 From the FUNCTION menu, press < or > to select Blue screen.

2 Press Y or y to select On or Off.

Note:

In the PC input mode, double-window mode (- page 23) or teletext mode (- page 21), this function is not available.

Adjusting the brightness of side panel

You can adjust the brightness of side panel in 14:9 or 4:3, etc. mode.

1 From the FUNCTION menu, press < or > to select

Side panel.

2 Press Y or y to adjust the settings as required.

Selecting the video input source to view

1 Press and hold o or press Q on the remote control until the video input mode list appears on the screen, then press

<or > to select appropriate input source (or press o on the TV right side panel or o on the remote control repeatedly to select required input source directly).

OK:	o:
	(Press and hold)
5		C1
4		2
3		1
2	1
1		PC
0		HDMI2
PC		HDMI1
HDMI2
HDMI1

Ex. PC VGA mode

PC VGA

2 Press Q.

o1 (o (1), video 1 input) or o 1S (S-video input)

o2 (o (2), video 2 input) or o 2S (S-video input)

oC1 (o (C1), COMPONENT VIDEO INPUT),

oC2 (o (C2), COMPONENT VIDEO INPUT), HDMI1 (o HDMI 1 input),

HDMI2 (o HDMI 2 input), PC (o RGB/PC, PC input)

Note:

When the component video input, PC input mode or HDMI input mode is selected, the MONITOR output terminals (- page 25) output audio signal only.

Side panel

1

20