Panasonic TX-32PB50F, TX-28PB50F Surround menu, Surround mode, Internal speaker

Surround menu

SOUND

Press the SOUND menu button
Move to Surround menu option
Access Surround menu
Move to chosen menu option
Adjust chosen option or access chosen menu
Press the TV/AV button at any time to go back to watching TV	TV/AV

If a DTS / Dolby Digital input is detected the Surround menu options instantly change --- Surround mode is not available. Ensure that the Digital Audio option in the SOUND menu is set to the correct AV input (see page 9 for details). A message displayed in the centre of the screen shows whether the signal is DTS or Dolby Digital, and gives a code indicating which channels are detected (see table to the right). Subwoofer output is not listed; if a subwoofer channel is detected then its contents are output, (the subwoofer output level can be adjusted or the subwoofer turned off via the subwoofer option in the SOUND menu --- see page 9 for details).

Code		Front outputs		Rear surround outputs
	Left	Right	Centre	Left	Right
1+1		Dual mono output
1/0		Mono output
2/0	n	n
3/0	n	n	n
2/1	n	n		Mono output
3/1	n	n	n	Mono output
2/2	n	n		n	n
3/2	n	n	n	n	n

Volume	The volume adjustment sets the overall
	Surround output volume.
Surround mode	When a DTS / Dolby Digital input is not
	detected this option is shown. Choose
	between Pro Logic and Simulated. The
	mode chosen here dictates the next menu
	option.

Speaker setting / Simulated setting

Speaker level

Front distance

Rear distance

If a DTS / Dolby Digital input is detected, or if Pro Logic is selected in Surround mode, this menu option is Speaker setting, allowing selection of Normal, Phantom or 3 Stereo modes, as described on page 26.

If Simulated is selected in Surround mode, this menu option is Simulated setting, allowing selection of Disco, Movie or Stadium modes, as described on page 26.

Allows adjustment of the volume for each speaker, as described on page 26.

Allows setting of the distance from the listening position to the front speakers.

Allows setting of the distance from the listening position to the rear speakers. If the rear surround speakers are closer to you than the centre speaker, you may hear dialogue “leakage” from the rear surround speakers. It may be necessary to reduce the volume of the rear speakers.

If a DTS / Dolby Digital input is detected, the Surround menu is as shown above (no Surround mode available).

Internal speaker	If you do not have an external centre speaker
	connected, set to On. If you wish to connect
	an external centre speaker then switch Off,
	see page 30 for connection details.

If no DTS / Dolby Digital input is detected, Surround mode appears as a menu option.

25