11
Press the SETUP menu button
Move to Tuningmenu option
Access Tuningmenu
Moveto chosen menu option
Adjustchosen option or access chosen menu
Press the TV/AV button at any time to go back to
watchingTV
Pressingthe STR button after having adjusted some
featureswill store the setting as the default (replacing
the factory setting).
Access in order to customise your programme
settings (eg: adding or deleting a programme
position)See page 12.
Allowsyou to automaticallyretune the TV. Useful
if you movehouse and wish to retune your TV to
thelocal stations. See page 14.
Allows individual programme positions to be
tuned manually.See page 15.
Useto make small adjustments to the tuning of an
individual station (useful for example when
weatherconditions are affecting reception quality
of a programme).
Letsyou select the correct transmi ssion standard
forthe transmission signal being received.
Lets you adjust the volume level of individual
stations.Use this feature if the volume level varies
significantly between stations. Adjusting one
station’svolume to bring it intoline with the other
stationsmeans you can avoid having to adjust the
volumeeach time you change channels.
Thisoption is used when a decoder is connected
viaAV2. Store the setting as On so that every time
this programme position is selected, the TV
softwareis set to handle the decoded information
(thisis important if your decoder unit is connected
to AV2via a Q ---LinkVCR).
When a strong signal (such as a cable signal) is
received, sometimes two channels transmitted
close together interfere witheach other’s picture
(thisis the ‘beat’ you see on the picture). Set this
option to On to ’damp down’ the strength of the
signal for the current programme position, so
eliminating the ’beat’. Store thesetting as On so
thesignal is ’damped’ every time this programme
position is selected.
Tuning menu --- overviewSETUP
TV/AV
STR