SECTION 4 " Configuration

Use

To

Read

The access point’s configuration is stored in

(Continued)

EEPROM. You reprogram the EEPROM

 

whenever you change the configuration, write

 

(save) the new configuration to EEPROM, and

 

reboot the access point.

Write

Write (save) a new configuration to EEPROM.

 

This command overwrites the previous configura-

 

tion. You must write the new configuration

 

to EEPROM and reboot the access point for

 

any changes to take effect.

Reboot

Reboot the access point. You must reboot the unit

 

for any changes you made to the configuration to

 

take effect.

Exit

Quit the configuration program. If you exit a new

 

configuration without writing it to EEPROM, any

 

changes you made are not saved.

?

Display online help for a command, option, or

 

setting.

Using the View Command

To view or modify configuration program settings, type View at the command prompt. The Main Options Menu appears:

[Tcpip]

[Bridge]

[Security]

The following chart describes how to use the options.

4-146710 Access Point User’s Guide

Page 80
Image 80
Intermec 6710 manual Using the View Command, Following chart describes how to use the options, Any changes to take effect