Intermec 6710 manual Press

SECTION 4 " Configuration

Use	To
[Tcpip]	Set options necessary for communications with
Page 4-16	this access point. The options apply to all
	TCP/IP ports. Telnet, SNMP, and HTTP
	communications are supported.
[Bridge]	Control the bridging of messages among the
Page 4-23	radio and Ethernet ports for this access point.
	Settings to control interaction with other access
	points are also under the [Bridge] option.
[Security]	Set the configuration program’s top-level
Page 4-86	password and other security passwords.

The screens in this section show the options’ default settings. Some settings (such as the serial number) are unique to each access point. Other settings (such as certain radio configurations) are automatically set and you cannot change them. This section identifies the settings you cannot change as “read-only.”

The following chart shows how to navigate the View command’s menus and edit data.

Press	To
[-] or [--]	Scroll up through items in a list.
[¯], [+], [=], or [Tab]	Scroll down through items in a list.
[®], [Enter], or [Spacebar]	Display an option’s settings or
	prompt after you highlight the
	option. Also use these keys to
	select the desired setting.
[¬], [Esc], or [Backspace]	Exit a menu or prompt.
[Esc]	Cancel editing.
[Enter]	Complete editing.

6710 Access Point User’s Guide 4-15