SECTION 4 " Configuration

Access Point Configuration

FConfiguration Menus

FReview/write Changes

FLogout

FReboot

Security

Once you’ve successfully entered the user name and password into your browser, you are authorized to access the configuration. If five (5) minutes elapses without configuration activity, you will become unauthorized again.

Only one computer at a time is allowed to be authorized for access to the con- figuration menus. If you unexpectedly receive a request for user name and password, it’s possible that another user is currently attempting to view or modify the configuration via telnet or the serial port. An attempt to start another HTTP session from another computer will be refused until this session has been logged out.

How to use the Configuration Menu

1.Select Review/write changes to see the existing changes from the defaults. Optionally select an Undo option to remove changes.

2.Locate and change configuration items by navigating in the Configuration Menu.

3.Select the Submit Changes button to submit the changes on each form.

4.Repeat the above steps until all changes have been submitted.

5.Select Review/write changes and review the changes you have made.

6.Select Commit to write the changes.

Note: Some early browser versions can’t be convinced by the server to always get a fresh copy of a document that was previously fetched. This might cause old and misleading information to be displayed. Updating the browser, pressing the reload button, or disabling the browser’s cache may be helpful.

Copyright e 1996-1997 Norand Corporation. All rights reserved.

6710 Access Point User’s Guide 4-91

Page 157
Image 157
Intermec 6710 manual Access Point Configuration