Intermec 6710 manual 10BASE5 Ethernet, Software Download

SECTION 1 " Preface

Section 3,	Helps you prepare your site before
“Installation”	you install the access point, and
	shows how to connect the access
	point to 10BASE-T, 10BASE2, and
	10BASE5 Ethernet.
Section 4,	Describes how to create a
“Configuration”	communications session with the
	access point, access FLASH and
	ROM, and set up the access point
	through its configuration menus.
Section 5,	Describes file system methodology
“Software Download”	and the functional characteristics
	of the software download process.
Section 6,	Describes the access point’s
“Indicator Lights”	indicator lights and contains
	troubleshooting tips.
Appendixes contain supplemental information:
Appendix A	Lists mechanical, electrical, and
	environmental specifications for
	the access point.
Appendix B	Lists specifications and antennas
	for the WLIF radio.
Appendix C	Lists specifications and antennas
	for the 900 MHz radio.
Appendix D	Lists specifications and antennas
	for the synthesized UHF radio. It
	also discusses UHF technology.
Appendix E	Describes OWL/IP (IP tunneling).
Appendix F	Shows port and cable pin-outs.
Appendix G	Describes the 6710 Management
	Information Base (MIB).

The glossary at the end of this manual lists network terms.

1-26710 Access Point User’s Guide