Intermec 6710 manual MI String, Rmi

SECTION 5 " Software Download

When the ROM command monitor is in quiet mode you must send three or more consecutive exclamation points

( ! ) to the DIAG port during the boot sequence to invoke the command monitor prompt (ap>).

Because the access point is in quiet mode no prompts appear to show you when to type the exclamation points. The easiest way to do this is to apply power to the access point, wait until the WLINK indicator light stops flashing for about 1 second, and then type three or more exclamation points.

MI String

MI String allows a custom modem initialization string to be used in the access point. When a custom modem initialization string is entered, it overrides the default string issued by the ROM on powerup.

During powerup, the ROM checks the EEPROM for a valid modem initialization string (custom initialization strings must start with the letters AT or at). If the ROM finds a valid string in the EEPROM, it uses this string instead of the default string in the ROM. To remove a custom modem initialization string, issue the RMI command.

RMI

RMI removes a custom modem initialization string from the access point EEPROM (see “MI String”). The next time the access point is powered on, the default modem initialization string (located in ROM) is loaded.

X

Command X exits the password submenu and returns to the Main Menu.

5-286710 Access Point User’s Guide