SECTION 4 " Configuration

Configuring the Access Point

When you create a local DIAG port or remote Telnet session with the access point, the configuration program’s password screen appears:

Configuration of Access Point

Copyright (c) 1995-1997 Norand Corporation. All rights reserved.

Portions copyright Epilogue Technology Corporation 1988-1995.

All rights reserved

IP: 0.0.0.0

Serial: (Unique 10-digit number.)

Password:

"NOTE: A different screen appears when you create a session through a Web browser. See page 4-88 for information about Web browser sessions.

The password screen shows the current settings for the IP address and serial number. It also shows the prompt for the top-level password. Enter the password (case insensitive) to display the Main Menu. The default password is CR52401.

Main Menu

After you enter the top-level password, the Main Menu appears:

4-126710 Access Point User’s Guide

Page 78
Image 78
Intermec 6710 manual Configuring the Access Point, Main Menu