Intermec 6710 MHz Options, File Name, Mode- Channel, Use Falcon to set 900 MHz radio options

SECTION 4 " Configuration

The default is 255.

The retries that occur are also counted by Frag Ack Retry.

Frag QFSK Retry should be smaller than Frag Ack Retry.

900 MHz Options

"NOTE: Appendix C provides additional information about the 900 MHz radio.

Use [Falcon] to set 900 MHz radio options:

File Name	”falcon_d.29k”
Mode-Channel	<DS 225K Channel 25>

File Name

File Name is the name of the radio’s driver software. Only change this name when directed to do so by a Systems Engineer. Normally, the program’s file name should not be changed.

Mode- Channel

Mode sets the bit rate option for the 900 MHz radio. Generally, the higher the bit rate, the lower the range of the access point. Channel defines a frequency range that is a small portion of the available bandwidth.

Various communication modes are available, which enable you to balance the need for radio coverage with the need for speed. Select the Mode--Channel option to display the list of mode and channel combinations, which are country-dependent.

4-746710 Access Point User’s Guide