APPENDIX G " MIB

These MIBs are on the 6710 Access Point’s MIB disk. You need to load the MIBs onto your management platform to query the access point for these management objects.

Getting Started

Install the MIBs onto your management platform in this order:

1.RFC1213.MIB

2.RFC1398.MIB

3.6710MIB.MIB

"NOTE: If you are using HP OpenView for Windows, use the OpenView Control/SNMP Manager/Manage Database menu items to add the previous listed MIBs to the HP OpenView MIB database. If you are not using HP OpenView for Windows, consult your network management station user’s guide for instructions on adding MIBs.

MIB-II Information

MIB-II is for use with network management protocols in TCP/IP-based internets. The 6710 Access Point supports most of MIB-II. Table G-1 contains the major groups.

G-26710 Access Point User’s Guide

Page 252
Image 252
Intermec 6710 manual Getting Started, MIB-II Information