SECTION 3 " Installation

Applying Power

B CAUTION:

NEVER remove the cover of the access point with power

 

applied. ALWAYS make the access point connection before

 

making the connection at the source (“load to source”).

 

Damage to the radio or other devices can occur with the cover

 

removed.

"NOTE: Connect the access point to an uninterruptable power source — a power source that cannot be inadvertently turned off or otherwise disconnected.

Power is applied to the access point through the grounded AC INPUT connector. See Figure 3-15 and the following procedure.

1.Plug the receptacle end of the power cord (1) into the AC INPUT connector.

2.Insert the three-prong plug on the other end of the power cord (2) into a grounded power outlet.

3.See Section 6, “Indicator Lights,” for descriptions of the indicator lights.

3-206710 Access Point User’s Guide

Page 64
Image 64
Intermec 6710 manual Applying Power