Intermec 6710 manual Network Mode Lights, Network Link Description

SECTION 6 " Indicator Lights

	Table 6-3
	MODE Indicator Light
Status	Indication
ON	Unit is not functional and is locked up.
BLINK	Unit is in network mode, the normal operating
	condition.
OFF	Unit is in command mode. It enters this mode when
	it detects a key press from an attached PC before it
	enters the boot mode, or when it detects an incoming
	signal from an attached modem.

NETWORK MODE Lights

NETWORK MODE indicator lights show the status of the access point’s network link. The lights are labeled R-LINK (left indicator) and W-LINK (right indicator). They work together to indicate the type of network link the access point has established. Table 6-4 shows links.

Table 6-4

NETWORK MODE Indicator Lights

R-LINK	W-LINK	Network Link Description
OFF	OFF	No network link established (unit is not
		connected to a network, or is reconfigur-
		ing).
OFF	ON	Unit is attached to network through an
		Ethernet port.
OFF	BLINK	Unit is attached to network through its
		OWL/IP port and is the designated bridge
		for a secondary Ethernet LAN.
ON	OFF	Unit is attached to the network through an
		RF (radio) connection.
ON	ON	Unit is operating as the super root.
ON	BLINK	Unit is attached to network through an RF
		connection and is the designated bridge for
		a secondary Ethernet LAN.
		6710 Access Point User’s Guide 6-5