SECTION 4 " Configuration

The callsign is granted as part of the FCC license process. Insert the callsign from the FCC license certificate at the callsign prompt.

Frequency

The Frequency option displays a list of frequencies programmed at the factory. Some radios have multiple frequencies. For example:

466170000 Hz

530000000 Hz

The default frequency is the first frequency programmed into the list. Due to regulatory constraints in most countries, frequencies can only be programmed by the factory or service centers equipped to make this change.

Master Mode

Access points with the S-UHF option installed can operate with Master Mode enabled or disabled. Master Mode may improve performance in some environments. It should only be enabled if the access point radio coverage area does not overlap other access points operating on the same frequency. If Master mode is disabled, this restriction does not apply. An access point operating with Master Mode disabled may overlap coverage areas with access points on the same or different frequencies.

Master Mode settings are:

Enabled

Disabled

6710 Access Point User’s Guide 4-77

Page 143
Image 143
Intermec 6710 manual Frequency, Master Mode