Remington Essential Guide to Power Loads for Power Screwdrivers

Application Chart

Power load listings are recommendations only. If you are in doubt, try a test fastening using the next lightest power load.

Power fasteners and power loads are available in blister packs of 25 and cartons of 100.

IMPORTANT

•Recommended for use with Remington® power loads and power fasteners.

•If power fastener goes below the top surface of the board, use penetrating control disc (see illustration below) or wash- ered SPW-type power fasteners.

•Operators and bystanders must ALWAYS wear goggles and ear protection which meet or exceed the accepted standards for adequate protection in your country. In the USA, refer to ANSI standards. In Canada, refer to CSA standards.

*Use power fastener with penetration control disc, part number 015549.

IMPORTANT

This tool is designed to use .22 caliber neck-down crimped loads, power levels 1 (gray) through 4 (yellow).

5/8"

Neck-Down Crimped	Straight Wadded
Power Load	Power Load

CAUTION: Do not use any load other than the .22 caliber neck-down crimped load. Other types of loads will cause load-ejection problems.

.22 CALIBER Type A, neck-down crimp loads for powder actuated tools

	Load		Color Code
Stock	Level	Load	Case
Number	Number	Strength	Body	Head
A22C1	1	light	brass	Gray
A22C2	2	medium	brass	Brown
A22C3	3	heavy	brass	Green
A22C4	4	extra heavy	brass	Yellow

119586 21