Operation
S
F
Safety ON
1.Always place safety ON/OFF switch in the SAFETY ON position before inserting power fastener and power load.
489.00
2.Grasp muzzle and slide barrel forward rapidly until it stops. This sets piston into firing position and opens the chamber.
3.Insert power fastener into muzzle of tool, head end first. Push the power fastener until point is even with end of tool. ALWAYS load the power fastener first, then the power load.
4.Select the proper Remington® Power Load (see Application Chart on pages 20 and 21) and insert into the chamber until it stops. NOTE: Failure to start with the lowest power level can result in overdrive condition and will result in damage to the tool (see page 13).
14 | 119586 |
