Remington r300 operating instructions Power Loads and Power Fasteners

Safety Precautions

30

WATER

2.Should the tool fail to fire, hold the muzzle firmly against the work surface for 30 seconds. Release the trigger and remove pressure on the tool while holding the muzzle against the work surface.Again press the tool firmly against the work surface and pull the trigger. If the tool still fails to fire, hold the tool firmly against the work surface for another 30 seconds before unloading and carefully discarding the misfired power load into water or oil.

Spall

Shield

3.ALWAYS use the spall shield when driving directly into concrete or steel. ALWAYS wear eye protection.

GAS

GASOLINE

OLINE

4.NEVER use a powder actuated tool in an explosive or flammable atmosphere or when non-sparking tools are required.

POWER LOADS AND Power FASTENERS

pOWEr LOaDS

pOWEr LOaDS

1.NEVER leave unfired power loads on floors or work surfaces.

119586