Emulex DCP_link manual DCPx86i/e Adapter Configuration, DCP286i-SBC Adapter Configuration

2-6 Chapter 2

DCPx86i/e Adapter Configuration

The remainder of Chapter 2 is divided into three sections according to adapter type (DCP286i-SBC, DCP386i, or DCP486e). Please refer to the section for the adapter you are installing.

DCP286i-SBC Adapter Configuration

The following diagram of the DCP286i-SBC adapter shows the location of all option setting switches and jumpers:

Figure 2-4 DCP286i-SBC Jumper Block Placement

Jumper Settings

NOTE: Jumper block J13 sets the Host Interrupt Level and SW1 sets the base I/O address for the 286 adapter. Reference the beginning of this chapter for details on these settings.