Software Installation
After a short delay, the Installation Options menu appears.
Figure 4-3 Installation Options Menu
Select Install on Local Server Only, then press <Enter>.
The INSTALL program copies several files from the INSTALL diskette to a local directory.
5)When the source files have been copied, the following message is displayed:
Installation was successful. Bring down and restart each server on which you installed the software to ensure that it uses the newest NLM files.
<Press Enter to continue>
6)Press <Enter>. The Installation Options menu will again be displayed.
7)Select Display Log File after install to check for any installation problems. A list of files that were not installed (for any reason) will be displayed at the bottom of the Display Log File.
8)Select Display README Files for new additions or information.
9)Select <Exit> to continue the installation procedures.
10)The list of Currently Installed Products is again displayed. Verify that EMULEX WAN for NetWare has been added to the list.
11)Highlight EMULEX WAN for NetWare and press <Enter> to access the Internetworking Configuration menu.
12)You are now ready to configure the Emulex DCP_link adapter and create specific WAN links. Please turn to Chapter 5, Software Configuration to continue.
